Reactively magnetron sputtered Ti-Al-N thin films with enhanced mechanical properties

被引:4
|
作者
Kourtev, J [1 ]
Pascova, R [1 ]
机构
[1] INST PHYS CHEM,SOFIA 1113,BULGARIA
关键词
D O I
10.1016/0042-207X(96)00195-9
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A simplified technology for reactive magnetron sputtering of Ti-Al-N coatings with improved mechanical properties is proposed. This technology is based on the known method for adhesion enhancement by depositing interlayers with graded composition. In the present contribution the adhesion of Ti-Al-N coatings on HSS substrates was significantly improved by consecutive deposition of two interlayers, the first one with constant composition nearly equal to that of the target used (Ti:Al = 75:25 at%) and the second one with graded composition through the thickness of the interlayer. The thicknesses of these interlayers are about 3% and 10% of the overall thickness of the coating, respectively. The coatings thus deposited are characterized with microhardness and adhesion comparable to those of the best Ti-Al-N films reported so far. The technology proposed in the present study could find a wide practical application for deposition of high qualify wear-resistant Ti-Al-N coatings on HSS tools. Copyright (C) 1995 Elsevier Science Ltd
引用
收藏
页码:1197 / 1201
页数:5
相关论文
共 50 条
  • [1] Structure, chemistry, and mechanical properties of non-reactively sputtered Ti-Al-N
    Bermanschlager, Sarah Christine
    Hajas, Balint Istvan
    Wojcik, Tomasz
    Ntemou, Eleni
    Primetzhofer, Daniel
    Kolozsvari, Szilard
    Bleicher, Friedrich
    Mayrhofer, Paul Heinz
    MATERIALS & DESIGN, 2025, 252
  • [2] THE EFFECTS OF NITROGEN FLOW ON REACTIVELY SPUTTERED TI-AL-N FILMS
    SHEW, BY
    HUANG, JL
    SURFACE & COATINGS TECHNOLOGY, 1995, 71 (01): : 30 - 36
  • [3] Effects of nitrogen flow on reactively sputtered Ti-Al-N films
    Shew, Bor-Yuan
    Huang, Jow-Lay
    Surface and Coatings Technology, 1995, 71 (01): : 30 - 36
  • [4] QUANTITATIVE AES INVESTIGATION OF MAGNETRON-SPUTTERED TI-AL-N FILMS
    SHEW, BY
    HUANG, JL
    SURFACE & COATINGS TECHNOLOGY, 1995, 73 (1-2): : 66 - 72
  • [5] The influence of substrate temperature and Al mobility on the microstructural evolution of magnetron sputtered ternary Ti-Al-N thin films
    Beckers, M.
    Hoglund, C.
    Baehtz, C.
    Martins, R. M. S.
    Persson, P. O. A.
    Hultman, L.
    Moeller, W.
    JOURNAL OF APPLIED PHYSICS, 2009, 106 (06)
  • [6] The influence of substrate temperature and Al mobility on the microstructural evolution of magnetron sputtered ternary Ti-Al-N thin films
    Beckers, M.
    Höglund, C.
    Baehtz, C.
    Martins, R.M.S.
    Persson, P.O.Å.
    Hultman, L.
    Möller, W.
    Journal of Applied Physics, 2009, 106 (06):
  • [7] The structure and hardness of magnetron sputtered Ti-Al-N thin films with low N contents (<42 at.%)
    Oliveira, J. C.
    Manaia, A.
    Dias, J. P.
    Cavaleiro, A.
    Teer, D.
    Taylor, S.
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (22-23): : 6583 - 6587
  • [8] Effects of Al concentrations on the microstructure and mechanical properties of Ti-Al-N films deposited by RF-ICPIS enhanced magnetron sputtering
    Li, Dongke
    Chen, JunFang
    Zou, Changwei
    Ma, Junhui
    Li, Pengfei
    Li, Ye
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 609 : 239 - 243
  • [10] Structural and mechanical properties of magnetron sputtered Ti-V-Cr-Al-N films
    Tsai, Du-Cheng
    Chang, Zue-Chin
    Kuo, Bing-Hau
    Shiao, Ming-Hua
    Shieu, Fuh-Sheng
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2013, 310 : 93 - 98