Hierarchical sliding-mode control of spatial inverted pendulum with heterogeneous comprehensive learning particle swarm optimization

被引:16
作者
Wang, Jia-Jun [1 ]
Liu, Guang-Yu [1 ]
机构
[1] Hangzhou Dianzi Univ, Sch Automat, Hangzhou 310018, Zhejiang, Peoples R China
基金
中国国家自然科学基金;
关键词
Spatial inverted pendulum; Hierarchical sliding-mode control; Heterogeneous comprehensive learning particle swarm optimization; Spatial trajectory tracking; DIFFERENTIAL EVOLUTION; CONTROLLED LAGRANGIANS; GLOBAL OPTIMIZATION; TRAJECTORY TRACKING; GENETIC ALGORITHM; STABILIZATION; DESIGN; SYSTEMS;
D O I
10.1016/j.ins.2019.05.004
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
As the extension of the present inverted pendulums (IPs), a novel spatial inverted pendulum (SIP) is proposed for the first time, which can move in three-dimensional space. The proposed SIP is viewed as the most general IP and is different from the existing IPs. Firstly, the model equations of the SIP are deduced from Lagrangian equations. The dynamic model equations of the SIP have five degrees of freedom and three control forces. To simplify the model equations of the SIP, a state transformation method is devised and presented step by step, assuming that all SIP parameters are exactly known. Through the proposed transformation, a concise block model of the SIP is obtained. Based on the concise block model of the SIP, hierarchical sliding-mode control (HSMC) is deployed in the trajectory tracking controller design for the SIR. To guarantee the convergence of the auxiliary sliding surfaces of the HSMC, heterogeneous comprehensive learning particle swarm optimization (HCLPSO) algorithm is used to optimize the control parameters for the HSMC. The proposed control method is capable to realize the spatial trajectory tracking of the SIP with high control performance. Simulation results verify the plausibility and effectiveness of the proposed control and optimization strategy for the SIR. (C) 2019 Elsevier Inc. All rights reserved.
引用
收藏
页码:14 / 36
页数:23
相关论文
共 50 条
[1]   Big Bang-Big Crunch optimized hierarchical sliding-mode control of X-Z inverted pendulum [J].
Wang, Jia-Jun ;
Kumbasar, Tufan .
SIMULATION MODELLING PRACTICE AND THEORY, 2018, 86 :25-35
[2]   Simultaneous Tracking and Stabilization of a Wheeled Inverted Pendulum: a Backstepping Sliding-Mode Approach [J].
Tsai, Ching-Chih ;
Hsieh, Shih-Min .
INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION, 2010, 11 :65-69
[3]   Robust stabilization and tracking control of spatial inverted pendulum using super-twisting sliding mode control [J].
Kumar, Satyendra ;
Ajmeri, Moina .
INTERNATIONAL JOURNAL OF DYNAMICS AND CONTROL, 2023, 11 (03) :1178-1189
[4]   Robust stabilization control of a spatial inverted pendulum using integral sliding mode controller [J].
Chawla, Ishan ;
Chopra, Vikram ;
Singla, Ashish .
INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION, 2021, 22 (02) :183-195
[5]   A Novel Hierarchical Recursive Nonsingular Terminal Sliding Mode Control for Inverted Pendulum [J].
Le, Hiep Dai ;
Nestorovic, Tamara .
ACTUATORS, 2023, 12 (12)
[6]   Hierarchical Sliding Mode Control Combined with Nonlinear Disturbance Observer for Wheeled Inverted Pendulum Robot Trajectory Tracking [J].
Hou, Ming ;
Zhang, Xuedong ;
Chen, Du ;
Xu, Zheng .
APPLIED SCIENCES-BASEL, 2023, 13 (07)
[7]   Saturated control design of a quadrotor with heterogeneous comprehensive learning particle swarm optimization [J].
Wang, Jia-Jun ;
Liu, Guang-Yu .
SWARM AND EVOLUTIONARY COMPUTATION, 2019, 46 :84-96
[8]   Stabilization and tracking control of X-Z inverted pendulum with sliding-mode control [J].
Wang, Jia-Jun .
ISA TRANSACTIONS, 2012, 51 (06) :763-770
[9]   Adaptive Hierarchical Fractional-Order Sliding Mode Control of an Inverted Pendulum-Cart System [J].
Jafary Fesharaki, Alireza ;
Tabatabaei, Mohammad .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (11) :13927-13942
[10]   Adaptive heterogeneous particle swarm optimization with comprehensive learning strategy [J].
Liu, Ziang ;
Nishi, Tatsushi .
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2022, 16 (04)