Effect of silicon on the kinetics of Nb(C, N) precipitation during the hot working of Nb-bearing steels

被引:31
|
作者
Dong, JX
Siciliano, F
Jonas, JJ
Liu, WJ
Essadiqi, E
机构
[1] McGill Univ, Dept Engn Met, Montreal, PQ H3A 2B2, Canada
[2] Canada Ctr Mineral & Energy Technol, Mat Technol Lab, Ottawa, ON K1A 0G1, Canada
关键词
Nb microalloyed steels; Nb(C; N); precipitation; Si additions; PTT curves; solubility product;
D O I
10.2355/isijinternational.40.613
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The effect of Si on the rate of Nb(C, N) precipitation was investigated by using fractional softening measurements. Compression specimens, with diameters of 7.6 mm and lengths of 11.4 mm, were prepared from four Nh microalloyed steels containing a range of Si concentrations from 0.01 mass% to 0.41 mass%. Double-hit compression tests, with a strain of 0.3 for each pass and a strain rate of 6.1/sec., were employed. A solution heat treatment was applied immediately prior to each test. It was found that the rate of Nb(C,N) precipitation in hot deformed austenite increases with Si concentration. This phenomenon is attributed to the increases in the activities of C and N that result from Si addition.
引用
收藏
页码:613 / 618
页数:6
相关论文
共 50 条
  • [1] Mathematical modelling of carbonitride precipitation during hot working in nb microalloyed steels
    Xu, YB
    Yu, YM
    Liu, XH
    Wang, GD
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2006, 22 (02) : 149 - 152
  • [3] The Mechanism of Hot Ductility Loss and Recovery in Nb-Bearing Low Alloy Steels
    Kang, M. H.
    Lee, J. S.
    Koo, Y. M.
    Kim, S. -J.
    Heo, N. H.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (10): : 4302 - 4306
  • [4] Numerical analysis of the Nb(C,N) precipitation kinetics in microalloyed steels
    Pudar, Milan
    Kozeschnik, Ernst
    Sormann, Axel
    Parteder, Erik
    STEEL RESEARCH INTERNATIONAL, 2008, 79 (08) : 660 - 664
  • [5] The influence of Ti on the hot ductility of Nb-bearing steels in simulated continuous casting process
    Luo, HW
    Karjalainen, LP
    Porter, DA
    Liimatainen, HM
    Zhang, Y
    ISIJ INTERNATIONAL, 2002, 42 (03) : 273 - 282
  • [6] Isothermal oxidation behavior of Nb-bearing austenitic cast steels at 950°C
    Zhao, Hailong
    Li, Longfei
    Feng, Qiang
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2022, 29 (04) : 814 - 824
  • [7] Effect of Nb and C on the hot flow behavior of Nb microalloyed steels
    Wei, Hai-lian
    Liu, Guo-quan
    MATERIALS & DESIGN, 2014, 56 : 437 - 444
  • [8] Micro Characterization of Hot-Rolled Plate of Nb-Bearing Grain-Oriented Silicon Steel
    Wang, Yong
    Li, Guangqiang
    Zhu, Chengyi
    Liu, Xinbin
    Liu, Yulong
    Gao, Yang
    Liu, Yu
    MATERIALS, 2022, 15 (02)
  • [9] Effect of Austenite Grain Size on the Hot Ductility of Nb-Bearing Peritectic Steel
    Cai, Zhaozhen
    An, Jiazhi
    Cheng, Biao
    Zhu, Miaoyong
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023, 54 (01): : 141 - 152
  • [10] Revealing the precipitation kinetics and strengthening mechanisms of a 450 MPa grade Nb-bearing HSLA steel
    Liu, Gang
    Li, Yuqi
    Liao, Tianci
    Wang, Shuize
    Lv, Bo
    Guo, Hongbin
    Huang, Yuhe
    Yong, Qilong
    Mao, Xinping
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 884