LiMnPO4 as an Advanced Cathode Material for Rechargeable Lithium Batteries

LiMnPO4 nanoparticles synthesized by the polyol method were examined as a cathode material for advanced Li-ion batteries. The structure, surface morphology, and performance were characterized by X-ray diffraction, high resolution scanning electron microscopy, high resolution transmission electron microscopy, Raman, Fourier transform IR, and photoelectron spectroscopies, and standard electrochemical techniques. A stable reversible capacity up to 145 mAh g(-1) could be measured at discharge potentials > 4 V vs Li/Li+, with a reasonable capacity retention during prolonged charge/discharge cycling. The rate capability of the LiMnPO4 electrodes studied herein was higher than that of LiNi0.5Mn0.5O2 and LiNi0.8Co0.15Al0.05O2 (NCA) in similar experiments and measurements. The active mass studied herein seems to be the least surface reactive in alkyl carbonate/LiPF6 solutions. We attribute the low surface activity of this material, compared to the lithiated transition-metal oxides that are examined and used as cathode materials for Li-ion batteries, to the relatively low basicity and nucleophilicity of the oxygen atoms in the olivine compounds. The thermal stability of the LiMnPO4 material in solutions (measured by differential scanning calorimetry) is much higher compared to that of transition-metal oxide cathodes. This is demonstrated herein by a comparison with NCA electrodes. (C) 2009 The Electrochemical Society. [DOI: 10.1149/1.3125765] All rights reserved.