Vulcanization and Thermal Properties of Silicone Rubber/Fluorine Rubber Blends

被引:12
作者
Wu, Weili [1 ]
Wang, Yiwen [1 ]
机构
[1] Qiqihar Univ, Coll Mat Sci & Engn, Qiqihar 161006, Peoples R China
来源
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS | 2019年 / 58卷 / 06期
关键词
Blends; characterization; fluorine rubber; silicone rubber; thermal properties; vulcanization; THERMOPLASTIC VULCANIZATE; POLY(VINYLIDENE FLUORIDE);
D O I
10.1080/00222348.2019.1609214
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
With the rapid development of automobile, aviation, aerospace, machinery and other fields, rubber products used in these fields required to meet higher requirements. Fluorine rubber (FKM) and silicone rubber (MVQ) have excellent performance in some areas. However, the FKM is poor in low-temperature resistance and processing performance, limiting its applicability. Although the MVQ has a wide range of temperature and excellent processing performance, but its mechanical properties and oil resistance are not good. In this work, the MVQ/FKM blends were prepared by two different mechanical blending methods. The effects of the mixing process, mass ratio, curing system and conditions of the blends were studied. The chemical compositions of the blends were analyzed by infrared spectroscopy (IR). The compatibility and the thermal properties of the blends were investigated by dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA), respectively. The results showed that the mechanical properties, compatibility and thermal stability of the blends were the best when they were prepared by kneading the FKM and MVQ individually in a two-rool mill roll, then mixing them together homegeneously with an MVQ/FKM mass ratio of 10/90, curing system of (4 phr, 1/9) dicumyl peroxide (DCP)/N, N-Dicinnamylidene-1, 6-hexanediamine (3(#) Vulcanizer), first curing conditions at 170 degrees C under 10MPa for 30min and post curing conditions at 200 degrees C for 6hours at 1 atmospheric pressure.
引用
收藏
页码:579 / 591
页数:13
相关论文
共 50 条
[1]   Study on Vulcanization and Thermal Decomposition Behaviors of Methyl Vinyl Silicone Rubber/Polyurethane Rubber Blends [J].
Gan, Lu-Miao ;
Ni, Hai-Ying ;
Zhou, Yuan-Jian ;
Chen, Jun .
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2011, 50 (08) :1491-1499
[2]   Wear and thermal properties of carbon fiber reinforced silicone rubber/fluorine rubber composites [J].
Wu, Weili ;
Li, Xiang .
JOURNAL OF RUBBER RESEARCH, 2019, 22 (03) :119-126
[3]   VULCANIZATION KINETICS OF SILICONE RUBBER [J].
袁强 ;
李玉福 ;
李光亮 .
Chinese Journal of Polymer Science, 1988, (04) :353-358
[4]   Modeling the vulcanization of rubber blends [J].
Likozar, Blaz ;
Krajnc, Matja .
MACROMOLECULAR SYMPOSIA, 2006, 243 :104-113
[5]   Wear and thermal properties of carbon fiber reinforced silicone rubber/fluorine rubber composites [J].
Weili Wu ;
Xiang Li .
Journal of Rubber Research, 2019, 22 :119-126
[6]   Effect of Silanes on Mechanical and Thermal Properties of Silicone Rubber/EPDM Blends [J].
Zhang, Chen ;
Zhang, Zhen Xiu ;
Pal, Kaushik ;
Shin, Oe Gi ;
Jo, Hyeon Choel ;
Lee, Sung Hoon ;
Kim, Jin Kuk .
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2011, 50 (02) :291-299
[7]   Vulcanization and mechanical properties of natural rubber liquid polyisoprene rubber blends [J].
Lee, HW ;
Lee, DS ;
Hong, SP .
POLYMER-KOREA, 1998, 22 (06) :966-971
[8]   Influence of thermal aging on the properties of EPDM/silicone rubber blends [J].
Chung, YK ;
Lee, SG ;
Cho, BR ;
Choi, KY .
POLYMER-KOREA, 2005, 29 (02) :166-171
[9]   Effect of curatives and fillers on vulcanization, mechanical, heat aging, and dynamic properties of silicone rubber and fluororubber blends [J].
Guo, Jianhua ;
Zeng, Xingrong ;
Li, Hongqiang ;
Luo, Quankun .
JOURNAL OF ELASTOMERS AND PLASTICS, 2012, 44 (02) :145-163
[10]   Effect of Silicone Rubber Content on Thermal Stabilities of EPDM/Silicone Blends [J].
Kim, Jong-Hak ;
Joo, Hyeok-Jong ;
Jin, Fan-Long ;
Park, Soo-Jin .
ELASTOMERS AND COMPOSITES, 2005, 40 (04) :266-271