Precipitation of paraequilibrium cementite: Experiments, and thermodynamic and kinetic modeling

被引:99
作者
Ghosh, G [1 ]
Olson, GB [1 ]
机构
[1] Northwestern Univ, Robert R McCormick Sch Engn & Appl Sci, Dept Mat Sci & Engn, Evanston, IL 60208 USA
基金
美国国家科学基金会;
关键词
analytical electron microscopy; cementite; thermodynamics; kinetics;
D O I
10.1016/S1359-6454(02)00054-X
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The precipitation of cementite prior to the precipitation of the strengthening M2C phase is investigated using two model ultra-high strength (UHS) steels. The structure, microstructure and chemical composition of cementite are studied by analytical electron microscopy techniques. The structure of cementite precipitated during early stages of tempering at 755 and 783 K was confirmed by convergent beam electron diffraction. In an alloy containing 0.16 mass% C, the cementite particles were primarily plate shaped and interlath type, whereas in an alloy containing 0.247 mass% C both inter- and intralath particles were observed. Consistent with the earlier studies on tempering of Fe-C martensite, lattice imaging of cementite suggests microsyntactic intergrowth of M5C2 (Hagg carbide). Quantification of the substitutional elements in cementite confirms its paraequilibrium state with ferrite at the very early stage of tempering. Computational thermodynamic and kinetic tools, Thermo-Cale and DICTRA (Diffusion controlled TRAnsformation) software. respectively. are used to model the precipitaton of paraequilibrium cementite in several multicomponent alloys. A thermodynamic model parameter describing the effect of Si on the stability of cementite is proposed. The model parameter is consistent with the following results: (a) that Si does not partition to cementite in Fe-Si-C and Co-Si-C alloys under orthoequilibrium conditions, and (b) there is a large driving force for the precipitation of paraequilibrium cementite in an Fe-0.41C-3Mn-2Si alloy where it has been experimentally verified. The nucleation driving forces for the precipitation of paraequilibrium cementite, and the two-phase (ferrite and cementite) paraequilibrium boundaries for multicomponent alloys are calculated using the Thero-Calc software systems. The results of growth simulations of cementite under paraequilibrium condition in multicomponent systems using the DICTRA software are also presented. (C) 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:2099 / 2119
页数:21
相关论文
共 52 条
[1]  
AARONSON HI, 1966, T METALL SOC AIME, V236, P768
[2]  
ALLEN SM, 1981, PHILOS MAG A, V43, P425
[3]   Models for numerical treatment of multicomponent diffusion in simple phases [J].
Andersson, Jan-Olof ;
Agren, John .
Journal of Applied Physics, 1992, 72 (04)
[4]  
[Anonymous], 1992, GEN PHYS PROPERTIES
[5]  
[Anonymous], ARCH EISENHHUTTENWES
[6]   MODEL FOR SOLUTE REDISTRIBUTION DURING RAPID SOLIDIFICATION [J].
AZIZ, MJ .
JOURNAL OF APPLIED PHYSICS, 1982, 53 (02) :1158-1168
[7]   ATOM-PROBE FIELD-ION MICROSCOPY STUDY OF THE PARTITIONING OF SUBSTITUTIONAL ELEMENTS DURING TEMPERING OF A LOW-ALLOY STEEL MARTENSITE [J].
BABU, SS ;
HONO, K ;
SAKURAI, T .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (03) :499-508
[8]   APFIM STUDIES ON MARTENSITE TEMPERING OF FE-C-SI-MN LOW-ALLOY STEEL [J].
BABU, SS ;
HONO, K ;
SAKURAI, T .
APPLIED SURFACE SCIENCE, 1993, 67 (1-4) :321-327
[9]  
Baker R.G., 1959, Journal of the Iron and Steel Institute, P257
[10]   DIFFUSIONAL FORMATION OF FERRITE IN IRON AND ITS ALLOYS [J].
BHADESHIA, HKDH .
PROGRESS IN MATERIALS SCIENCE, 1985, 29 (04) :321-386