Study of the effect of entrance length on heat transfer to fibre suspensions in annular flow heat exchangers

被引:1
|
作者
Kazi, S. N. [1 ]
Duffy, G. G. [2 ]
Chen, X. D. [3 ]
机构
[1] Univ Malaya, Fac Engn, Dept Mech Engn, Kuala Lumpur 50603, Malaysia
[2] Univ Auckland, Sch Engn, Dept Chem & Mat Engn, Auckland 1, New Zealand
[3] Monash Univ, Fac Engn, Dept Chem Engn, Chair Biotechnol & Food Engn, Clayton, Vic 3800, Australia
关键词
Heat transfer; Natural fibre; Fibre concentration; Coarseness; Annular flow; Consistency; DRAG-REDUCING REGIME; VALIDATION; MOTION;
D O I
10.1016/j.ijheatmasstransfer.2014.06.081
中图分类号
O414.1 [热力学];
学科分类号
摘要
In internal flow the boundary layer is unable to develop without eventually being constrained. There is no satisfactory general expression for the entry length in turbulent flow and it is approximately independent of Reynolds number and remains within 10-60D(h). Present experimental investigation has highlighted the effect of entry length (23 and 38D(h)) on heat transfer to fibre suspensions in annular passage. It is observed that there is no significant variation of heat transfer coefficients with change in entrance length for water flow. Fibre suspensions flow at low consistency provides data with little variation whereas at higher consistency heat transfer coefficients data provides some variations but the trend remains similar for both short and long entrance lengths in the test section. Effects of fibre concentrations and flexibility in suspensions are providing similar trends in heat transfer irrespective of entrance length in annular flow, pipe flow and a larger annular gap. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:548 / 556
页数:9
相关论文
共 50 条
  • [31] A Comparative Study of Flow Boling Heat Transfer in Coated and Uncoated Plate Heat Exchangers
    Ghorbani Tari, Zahra
    Coletti, Francesco
    Reip, Alex
    Karayiannis, Tassos G.
    4TH THERMAL AND FLUIDS ENGINEERING CONFERENCE, ASTFE 2019, 2019,
  • [32] Numerical investigation on natural convection heat transfer of the annular structure in heat exchangers and solenoids
    Tan, Sheng-Yu
    Liu, Jie
    Lu, Wen-Qiang
    APPLIED THERMAL ENGINEERING, 2019, 150 : 674 - 685
  • [33] Stokes flow heat transfer in an annular, rotating heat exchanger
    Saatdjian, E.
    Rodrigo, A. J. S.
    Mota, J. P. B.
    APPLIED THERMAL ENGINEERING, 2011, 31 (8-9) : 1499 - 1507
  • [34] Effect of nanoparticles on heat transfer in mini double-pipe heat exchangers in turbulent flow
    Aghayari, Reza
    Maddah, Heydar
    Ashori, Fatemeh
    Hakiminejad, Afshin
    Aghili, Mehdi
    HEAT AND MASS TRANSFER, 2015, 51 (03) : 301 - 306
  • [35] Effect of nanoparticles on heat transfer in mini double-pipe heat exchangers in turbulent flow
    Reza Aghayari
    Heydar Maddah
    Fatemeh Ashori
    Afshin Hakiminejad
    Mehdi Aghili
    Heat and Mass Transfer, 2015, 51 : 301 - 306
  • [36] A MODIFIED CORRELATION FOR FLOW BOILING HEAT TRANSFER IN PLATE HEAT EXCHANGERS
    Lv, Tong
    Zheng, Boren
    Li, Wei
    Ayub, Zahid
    PROCEEDINGS OF THE ASME 6TH INTERNATIONAL CONFERENCE ON MICRO/NANOSCALE HEAT AND MASS TRANSFER, 2019, 2019,
  • [37] Flow maldistribution and heat transfer characteristics in plate and shell heat exchangers
    Beckedorff, L.
    da Silva, R.P.P.
    Martins, G.S.M.
    de Paiva, K.V.
    Oliveira, J.L.G.
    Oliveira, A.A.M.
    International Journal of Heat and Mass Transfer, 2022, 195
  • [38] FLOW AND LOCAL HEAT-TRANSFER IN PLATE HEAT-EXCHANGERS
    LADWIG, HP
    REUTER, H
    CHEMIE INGENIEUR TECHNIK, 1980, 52 (03) : 273 - 273
  • [39] Flow maldistribution and heat transfer characteristics in plate and shell heat exchangers
    Beckedorff, L.
    da Silva, R. P. P.
    Martins, G. S. M.
    de Paiva, K., V
    Oliveira, J. L. G.
    Oliveira, A. A. M.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2022, 195
  • [40] HEAT-TRANSFER IN CROSS-FLOW HEAT-EXCHANGERS
    ISENBERG, J
    ISRAEL JOURNAL OF TECHNOLOGY, 1972, 10 (04): : 333 - &