Fracture toughness of aluminum nitride ceramics at cryogenic temperatures

被引:4
作者
Wei, Sai [1 ]
Xie, Zhipeng [1 ]
Xue, Weijiang [1 ]
Yi, Zhongzhou [2 ]
Chen, Juan [1 ]
Cheng, Lixia [1 ]
机构
[1] Tsinghua Univ, Sch Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China
[2] Honghe Univ, Coll Sci, Honghe 661100, Yunnan, Peoples R China
关键词
Toughness and toughening; Grain boundary; Cryogenic temperatures; THERMAL-CONDUCTIVITY; ELECTRON-MICROSCOPY; ALN CERAMICS; GRAIN-SIZE; INSULATION; STRENGTH; BEHAVIOR; MODE;
D O I
10.1016/j.ceramint.2014.05.012
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
We reported, for the first time, the fracture toughness of aluminum nitride ceramics at cryogenic temperatures. The fracture toughness increased from 3.98 +/- 0.19 to 4.59 +/- 0.28 MPa m(1/2) with the decreasing temperature from 293 to 77 K. Increasing fraction of transgranular fracture (from 7.3% at 293 K to 14.5% at 77 K) was proposed as a governing mechanism for toughness improvement at cryogenic temperatures based on the experimental observations. The effect of residual stresses on crack propagation was theoretically analyzed, considering energy release rates of intergranular and transgranular fractures. The variation of crack paths would contribute to the change of fracture modes and fracture toughness at cryogenic temperatures. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码:13715 / 13718
页数:4
相关论文
共 50 条
  • [41] Notch radius effect on fracture toughness of ceramics pertinent to grain size
    Yang, Shuangge
    Zhang, Chunguo
    Zhang, Xiancheng
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (12) : 4217 - 4223
  • [42] Deciphering the effect of grain boundary characteristics on fracture toughness of silicon nitride ceramics through a CNN regression model
    Nakashima, Yuki
    Furushima, Ryoichi
    Zhou, You
    Hirao, Kiyoshi
    Ohji, Tatsuki
    Fukushima, Manabu
    CERAMICS INTERNATIONAL, 2024, 50 (04) : 6680 - 6686
  • [43] Fracture toughness of graphene/aluminum nanolaminated composites
    Tanaka, Carina B.
    Teng, Haoyu
    Li, Bosong
    Gludovatz, Bernd
    Xiong, Ding-Bang
    Kruzic, Jamie J.
    MATERIALS LETTERS, 2023, 337
  • [44] Toughening Ceramics down to Cryogenic Temperatures by Reentrant Strain-Glass Transition
    Fang, Minxia
    Ji, Yuanchao
    Ni, Yan
    Wang, Wenjia
    Zhang, Hengmin
    Wang, Xifei
    Xiao, Andong
    Ma, Tianyu
    Yang, Sen
    Ren, Xiaobing
    PHYSICAL REVIEW LETTERS, 2023, 130 (11)
  • [45] Vat photopolymerization of high-strength aluminum nitride ceramics through nitrate additives coating
    Qi, Yujie
    Wu, Haidong
    Zhang, Wenduo
    Huang, Pengjin
    Chen, Xuanzhi
    Lin, Kunji
    Wu, Shanghua
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2025, 45 (07)
  • [46] Critical grain size and fracture toughness of 2 mol.% yttria-stabilized zirconia at ambient and cryogenic temperatures
    Xue, Weijiang
    Xie, Zhipeng
    Yi, Jian
    Chen, Juan
    SCRIPTA MATERIALIA, 2012, 67 (12) : 963 - 966
  • [47] Fracture model of meso-ceramics based on relative size and prediction of fracture toughness and bending strength
    Zhang, Min
    Zhao, Li
    Guan, Junfeng
    Hao, Ying
    CERAMICS INTERNATIONAL, 2023, 49 (22) : 35135 - 35144
  • [48] Enhanced Fracture Toughness of Pressureless-sintered SiC Ceramics by Addition of Graphene
    Li, Qisong
    Zhang, Yujun
    Gong, Hongyu
    Sun, Haibin
    Li, Wenjie
    Ma, Li
    Zhang, Yanshuang
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2016, 32 (07) : 633 - 638
  • [49] The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures
    Li, DongYue
    Zhang, Yong
    INTERMETALLICS, 2016, 70 : 24 - 28
  • [50] Cryogenic formability of a solution-treated aluminum alloy sheet at low temperatures
    Yuan, Shijian
    Cheng, Wangjun
    Liu, Wei
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021, 298