A novel tool path generation method for robot milling process

被引：0

作者：

Zhang, Bin ^{[1
]}

Huang, Bin-Bin ^{[1
]}

Song, Ya-Qin ^{[1
]}

Tang, Chen ^{[1
]}

机构：

[1] China Jiliang Univ, Hangzhou, Zhejiang, Peoples R China

来源：

PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON MECHANICS AND MECHATRONICS (ICMM 2015) | 2016年

关键词：

Robots; Milling process; Tool path; Cuttercontract route method;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Robot milling process is an important development direction of robot technology, and the automatic tool path generation method is the key step of it. In this paper, an improved CC route method is presented to generate the tool path based on the geometric development platform of Open Cascade. By adjusting the distance of constrain planes dynamically, the inhomogeneous problem of traditional CC method is avoided and the robot milling precision can be improved. Based on the above, a corresponding CAM system is developed. Tool path of rough and fine milling process for free surfaces can be generated through this system. At last, the feasibility and precision of this method are validated by simulation and experiment.

引用

页码：936 / 945

页数：10

共 9 条

[1] VR-CAD integration: Multimodal immersive interaction and advanced haptic paradigms for implicit edition of CAD models [J].

Bourdot, P. ;

Convard, T. ;

Picon, F. ;

Ammi, M. ;

Touraine, D. ;

Vezien, J. -M. .

COMPUTER-AIDED DESIGN, 2010, 42 (05) :445-461

[2] Implementation of a robot system for sculptured surface cutting. Part 1. Rough machining [J].

Chen Y.H. ;

Hu Y.N. .

The International Journal of Advanced Manufacturing Technology, 1999, 15 (9) :624-629

[3]

Han Guangchao, 2008, Journal of Huazhong University of Science and Technology, V36, P60

[4]

Lauwers B, 2002, EUROPEAN J MEC UNPUB, V47, P215

[5]

Liu Chuhui, 2010, J ZHEJIANG U E UNPUB, P426

[6]

NIU XJ, 2007, ROB BIOM 2007 ROBIO, P1936

[7] Modeling and grinding large sculptured surface by robotic digitization [J].

Park, J. W. ;

Cho, H. U. ;

Chung, C. W. ;

Lee, Y. S. ;

Jeon, D. J. .

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (07) :2087-2091

[8]

Wang Taiyong, 2008, J MECH ENG UNPUB, V43, P109

[9]

Xiao Wenlei, 2011, Journal of Mechanical Engineering, V47, P52, DOI 10.3901/JME.2011.15.052

← 1 →