Push-off tests on pin-connected shear studs with composite steel-concrete beams

被引：25

作者：

Tahir, Mahmood Md ^{[1
]}

Shek, Poi Ngian ^{[1
]}

Tan, Cher Siang ^{[1
]}

机构：

[1] Univ Teknol Malaysia, Steel Technol Ctr, Fac Civil Engn, Utm Skudai 81310, Johor, Malaysia

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2009年 / 23卷 / 09期

关键词：

Shear stud; High strength pin; Push-off tests; Composite construction;

D O I：

10.1016/j.conbuildmat.2009.04.008

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

A new stud system fastened with high strength pins was investigated experimentally in this paper. This system is reported to be the fastest and the most economical method for installing studs to steel roof and floor decking in composite construction. It is 5-10 times faster than welding, screwing, or using powder actuated tools, which will directly reduce the fastening cost. These advantages would make significant contribution to the popularity of composite construction. The shear capacity of headed studs in composite steel-concrete beams has been determined experimentally in seven full-scale push-off tests. The tests were used to study the strength and ductility of the proposed stud system. Maximum resistances from the experimental tests are compared with the predictions of EC 4 and results from other researchers. The capacity of the stud is reduced due to fracture of the pins that occur before the shear stud had yielded. The proposed stud system can be improved further by increasing the size and the strength of the pins and base plate. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：3024 / 3033

页数：10

共 11 条

[1]

AN L, 1991, 916 CHALM U TECHN DI

[2]

BOKSUN K, 2001, 1 INT C STEEL COMP S, P1327

[3]

British Standards Institution (BSI), 2004, 199411 BSI BS EN

[4]

*FACT MUT RES, 1991, COMPR AIR ACT FAST S

[5]

*FACT MUT RES, 1976, COMPR AIR ACT STEEL

[6]

Kong F., 1990, REINFORCED PRESTRESS, V3rd

[7]

LAM D, 1998, STRUCT ENG, V76

[8]

Lam D., 2001, Structural Engineering, Mechanics and Computation, P401, DOI DOI 10.1016/B978-008043948-8/50041-2

[9]

LUTTRELL LD, 1981, STEEL SHEAR DIAPHRAG

[10]

MATUS RA, 1996, ENG FDN C COMPOSITE, V3

← 1 2 →