Technological Properties of Metallized Carbon Cloth

被引：0

作者：

Chudnov, I. V. ^{[1
]}

Nelyub, V. A. ^{[1
]}

Marycheva, A. N. ^{[1
]}

机构：

[1] Natl Res Univ, Bauman State Tech Univ, Moscow 105005, Russia

来源：

RUSSIAN METALLURGY | 2020年 / 2020卷 / 13期

基金：

俄罗斯基础研究基金会;

关键词：

carbon cloth; metallic coating; test bench; vacuum infusion;

D O I：

10.1134/S0036029520130066

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The results of studying the properties of carbon cloth with a metallic coating and the related coal plastics prepared by a vacuum infusion technology are presented. It is experimentally found that the metallic coating affects the porosity of the cloth, decreasing it by 17% at a coating thickness of 30 nm. The deposition of the metallic coating on the carbon cloth weakly affects on the total impregnation time, decreasing it only by 3.6-4.1%. A comparative analysis of the two technologies by a standard method with the manual fabrication of a vacuum sack and using a test bench with an elastic membrane shows that the use of the test bench makes it possible to accelerate the impregnation process, to decrease the consumption of a binder, and to level the motion front of the binder.

引用

页码：1453 / 1457

页数：5

共 14 条

[1] [Баринов Дмитрий Яковлевич Barinov Dmitriy], 2017, [Перспективные материалы, Perspektivnye materialy], P19
[2] Baurova N. I., 2016, APPL POLYM COMPOSITE
[3] Baurova N.I., 2015, POLYM SCI D, V8, P1, DOI DOI 10.1134/S1995421215010037
[4] Baurova NI, 2016, POLYM SCI D, V9, P402
[5] Bobkovich B. B., 2014, POLYM COMPOSITE MAT
[6] Gorbatkina Yu. A., 2018, Adhesion of Modified Epoxides to Fibers
[7] Kablov E. N., 2004, AVIATSION MAT TEKHN, P36
[8] Kuperman A. M., 2012, KHIM FIZ, V31, P50
[9] [Нелюб В.А. Nelyub V.A.], 2019, [Композиты и наноструктуры, Kompozity i nanostruktury], V11, P23
[10] [НЕЛЮБ В.А. Nelyub V.A.], 2018, [Технология металлов, Tekhnologiya metallov], P7

← 1 2 →