Reducing the flammability of hydrophobic silica aerogels by doping with hydroxides

被引:37
|
作者
Li, Zhi [1 ]
Huang, Siqi [1 ]
Shi, Long [3 ]
Li, Zhicheng [2 ]
Liu, Qiong [1 ]
Li, Ming [1 ]
机构
[1] Cent S Univ, Sch Resource & Safety Engn, Changsha 410083, Hunan, Peoples R China
[2] Cent S Univ, Sch Mat Sci & Engn, Changsha 410083, Hunan, Peoples R China
[3] RMIT Univ, Sch Engn, Civil & Infrastruct Engn Discipline, Melbourne, Vic 3000, Australia
关键词
Hydrophobic silica aerogel; Flammability; Hydroxide; Thermal analysis; Flame-retardant mechanism; FLAME RETARDANCY; COMPOSITES; INSULATION;
D O I
10.1016/j.jhazmat.2019.03.112
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In this work, we utilized Al(OH)(3) (AH) and Mg(OH)(2) (MH) as dopants to reduce the flammability of hydrophobic silica aerogels (SA) and the related thermal properties and flame retardance were investigated detailedly. The TG-DSC analyses showed the thermostability of SA in MH/SA reached 512.4 degrees C and that for AH/SA was just 426.1 degrees C, both of which were higher than that of pure SA, 399.5 degrees C. It was known from cone calorimeter tests that the heat release rate, peak heat release rate and total heat release of AH/SA and MH/SA decreased significantly compared to that of pure SA. The time to ignition (TTI) of MH/SA was dramatically extended, reaching 20(similar to)38 s, which was far longer than those of pure SA ((similar to)6 s) and AH/SA (3(similar to)8 s). The reduction in CO concentration, CO production rate and cumulative CO production verified the decreased smoke toxicity of AH/SA and MH/SA. It was further indicated that the flame-retardant effect of AH and MH correlated with their inhibitory effect on the pyrolysis of SA, while MH showed much better flame-retardant performance than that of AH. The research outcomes provide an inspiration to reduce the flammability of SA and benefit their expansion in thermal insulation field.
引用
收藏
页码:536 / 546
页数:11
相关论文
共 50 条
  • [1] Reducing the flammability of hydrophobic silica aerogels by tailored heat treatment
    Xiaoxu Wu
    Zhi Li
    Gabriel Joao
    Yan Zhang
    Siqi Huang
    Qiong Liu
    Journal of Nanoparticle Research, 2020, 22
  • [2] Reducing the flammability of hydrophobic silica aerogels by tailored heat treatment
    Wu, Xiaoxu
    Li, Zhi
    Joao, Gabriel
    Zhang, Yan
    Huang, Siqi
    Liu, Qiong
    JOURNAL OF NANOPARTICLE RESEARCH, 2020, 22 (04)
  • [3] Flammability and oxidation kinetics of hydrophobic silica aerogels
    Li, Zhi
    Cheng, Xudong
    Shi, Long
    He, Song
    Gong, Lunlun
    Li, Congcong
    Zhang, Heping
    JOURNAL OF HAZARDOUS MATERIALS, 2016, 320 : 350 - 358
  • [4] Hydrophobic silica aerogels
    J Non Cryst Solids, (23):
  • [5] HYDROPHOBIC SILICA AEROGELS
    YOKOGAWA, H
    YOKOYAMA, M
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 1995, 186 : 23 - 29
  • [6] Assessment on thermal safety of aluminum hydroxide doping hydrophobic silica aerogels
    Sun, Mengtian
    Li, Zhi
    Zhang, Yan
    Wu, Xiaoxu
    Shi, Long
    Liu, Qiong
    Li, Ming
    JOURNAL OF NANOPARTICLE RESEARCH, 2022, 24 (04)
  • [7] Assessment on thermal safety of aluminum hydroxide doping hydrophobic silica aerogels
    Mengtian Sun
    Zhi Li
    Yan Zhang
    Xiaoxu Wu
    Long Shi
    Qiong Liu
    Ming Li
    Journal of Nanoparticle Research, 2022, 24
  • [8] Reducing the thermal hazard of hydrophobic silica aerogels by using dimethyldichlorosilane as modifier
    Wang, Yinfeng
    Li, Zhi
    Huber, Lukas
    Wu, Xiaoxu
    Huang, Siqi
    Zhang, Yan
    Huang, Rui
    Liu, Qiong
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2020, 93 (01) : 111 - 122
  • [9] Reducing the thermal hazard of hydrophobic silica aerogels by using dimethyldichlorosilane as modifier
    Yinfeng Wang
    Zhi Li
    Lukas Huber
    Xiaoxu Wu
    Siqi Huang
    Yan Zhang
    Rui Huang
    Qiong Liu
    Journal of Sol-Gel Science and Technology, 2020, 93 : 111 - 122
  • [10] Hydrophobic silica aerogels by silylation
    Duan, Yannan
    Jana, Sadhan C.
    Lama, Bimala
    Espe, Matthew P.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2016, 437 : 26 - 33