Experimental study on dynamic compressive properties of fiber-reinforced reactive powder concrete at high strain rates

被引:92
作者
Hou, Xiaomeng [1 ,2 ]
Cao, Shaojun [1 ,2 ]
Zheng, Wenzhong [1 ,2 ]
Rong, Qin [1 ]
Li, Gang [1 ,2 ]
机构
[1] Harbin Inst Technol, Key Lab Struct Dynam Behav & Control, Minist Educ, Harbin 150090, Heilongjiang, Peoples R China
[2] Harbin Inst Technol, Key Lab Smart Prevent & Mitigat Civil Engn Disast, Minist Ind & Informat Technol, Harbin 150090, Heilongjiang, Peoples R China
基金
中国国家自然科学基金;
关键词
Reactive powder concrete; Split Hopkinson pressure bar; Energy absorption; Dynamic stress-strain responses; Dynamic increase factor; HOPKINSON PRESSURE BAR; MECHANICAL PROPERTIES; HIGH-TEMPERATURE; CEMENT PASTE; BEHAVIOR; PERFORMANCE; STRENGTH; MORTAR; MODEL; RESISTANCE;
D O I
10.1016/j.engstruct.2018.05.036
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Dynamic compression tests were performed on reactive powder concrete (RPC) using split Hopkinson pressure bar (SHPB) apparatus. A total of 102 RPC samples including plain RPC (PRPC), steel fiber-reinforced RPC (SFRPC) with 2% and 5% volumetric fractions of steel fiber, and hybrid fiber reinforced RPC (SPFRPC) with 0.2% polypropylene (PP) fiber and 2% steel fiber were characterized at high strain rate of 72-317 s(-1). The characteristics of wave transmission, dynamic compressive strength, compressive deformation, energy absorption ability, and dynamic increase factor (DIF) of RPC under high strain rate impact were systematically investigated. Results revealed that the dynamic compressive strength of PRPC was more sensitive than that of SFRPC. With the addition of 0.2% PP fiber, the dynamic compressive strength of SFRPC exhibited a slight decrease. The critical strain increased with increasing strain rate. In all cases of RPC, the critical damage variable decreased with increasing fiber content subjected to same strain rate impact. The energy absorption of RPC increased with increasing content of steel fiber, which was found to be higher than normal strength concrete and high strength concrete. It was observed that application of CEB formula to calculate DIF of RPC was not safe. Thus, an empirical formula for DIF of RPC was proposed based on test data of this study and existing literature results.
引用
收藏
页码:119 / 130
页数:12
相关论文
共 51 条
[1]   High temperature and residual properties of reactive powder concrete - A review [J].
Abid, Muhammad ;
Hou, Xiaomeng ;
Zheng, Wenzhong ;
Hussain, Raja Rizwan .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 147 :339-351
[2]  
[Anonymous], 1984, ACI J
[3]  
[Anonymous], COMMITTEE EURO INT B, V195, P196
[4]  
[Anonymous], INT S SHOCK IMP DYN
[5]   Response of normal-strength and ultra-high-performance fiber-reinforced concrete columns to idealized blast loads [J].
Astarlioglu, Serdar ;
Krauthammer, Ted .
ENGINEERING STRUCTURES, 2014, 61 :1-12
[6]   High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers [J].
Aydin, Serdar ;
Yazici, Halit ;
Baradan, Buelent .
CONSTRUCTION AND BUILDING MATERIALS, 2008, 22 (04) :504-512
[7]   Dynamic splitting tensile test of hybrid-fiber-reinforced reactive powder concrete [J].
Cao, Shaojun ;
Hou, Xiaomeng ;
Rong, Qin ;
Li, Gang .
EMERGING MATERIALS RESEARCH, 2018, 7 (01) :52-57
[8]  
Chen X, 2016, J MAT CIVIL ENG, V28
[9]   Compressive Strength of Concrete Cores under High Strain Rates [J].
Chen, Xudong ;
Wu, Shengxing ;
Zhou, Jikai .
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES, 2015, 29 (01)
[10]   Quantification of dynamic tensile behavior of cement-based materials [J].
Chen, Xudong ;
Wu, Shengxing ;
Zhou, Jikai .
CONSTRUCTION AND BUILDING MATERIALS, 2014, 51 :15-23