The hot deformation behavior and processing map of Ti-47.5Al-Cr-V alloy

被引：61
作者：
Du, Zhihao [1 ]
Jiang, Shaosong [1 ]
Zhang, Kaifeng [1 ]
机构：
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
来源：
MATERIALS & DESIGN | 2015年 / 86卷
关键词：
TiAl alloy; Hot deformation behavior; Processing map; Dynamic reaystallization; TIAL-BASED ALLOY; DYNAMIC RECRYSTALLIZATION BEHAVIOR; MG-CU ALLOY; POWDER-METALLURGY; MICROSTRUCTURAL CONTROL; HIGH NB; TEMPERATURE DEFORMATION; MECHANICAL-PROPERTIES; WORKING BEHAVIOR; STAINLESS-STEEL;
D O I：
10.1016/j.matdes.2015.07.027
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The high temperature flow behavior of as-extruded Ti-47.5A1-Cr-V alloy has been investigated at the temperature between 1100 degrees C and 1250 degrees C and the strain rate range from 0.001 s(-1) to I s(-1) by hot compression tests. The results showed that the flow stress of this alloy had a positive dependence on strain rate and a negative dependence on deformation temperature. The activation energy Qwas calculated to be 409 ki/mol and the constitutive model of this material was established. By combining the power dissipation map with instability map, the processing map was.established to optimize the deformation parameters. The optimum deformation parameter was at 1150 degrees C-1200 degrees C and 0.001 s(-1)-0.03 s(-1) this alloy. The microstructure of specimens deformed at different conditions was analyzed and connected with the processing map. The material underwent instability deformation at the strain rate of 1 s(-1), which was predicted by the instability map. The surface fracture was observed to be the identification of the instability. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：464 / 473
页数：10
相关论文
共 45 条
[1]   Hot deformation and processing maps of extruded ZE41A magnesium alloy [J].
Anbuselvan, S. ;
Ramanathan, S. .
MATERIALS & DESIGN, 2010, 31 (05) :2319-2323
[2]   Phase stability of a γ-TiAl based alloy upon annealing:: comparison between experiment and thermodynamic calculations [J].
Beschliesser, M ;
Clemens, H ;
Kestler, H ;
Ieglitsch, F .
SCRIPTA MATERIALIA, 2003, 49 (04) :279-284
[3]   Effect of alloying elements on the behaviour of TiAl-based alloys [J].
Brotzu, A. ;
Felli, F. ;
Pilone, D. .
INTERMETALLICS, 2014, 54 :176-180
[4]   Study of hot deformation of an Al-Cu-Mg alloy using processing maps and microstructural characterization [J].
Cepeda-Jimenez, C. M. ;
Ruano, O. A. ;
Carsi, M. ;
Carreno, F. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 :530-539
[5]   Flow characteristics and constitutive modeling for elevated temperature deformation of a high Nb containing TiAl alloy [J].
Cheng, Liang ;
Xue, Xiangyi ;
Tang, Bin ;
Kou, Hongchao ;
Li, Jinshan .
INTERMETALLICS, 2014, 49 :23-28
[6]   Deformation and dynamic recrystallization behavior of a high Nb containing TiAl alloy [J].
Cheng, Liang ;
Chang, Hui ;
Tang, Bin ;
Kou, Hongchao ;
Li, Jinshan .
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 552 :363-369
[7]   Construction of processing map for biomedical Co-28Cr-6Mo-0.16N alloy by studying its hot deformation behavior using compression tests [J].
Chiba, Akihiko ;
Lee, Sang-Hak ;
Matsumoto, Hiroaki ;
Nakamura, Mitsuru .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 513-14 :286-293
[8]   In and ex situ investigations of the β-phase in a Nb and Mo containing γ-TiAl based alloy [J].
Clemens, H. ;
Chladil, H. F. ;
Wallgram, W. ;
Zickler, G. A. ;
Gerling, R. ;
Liss, K. -D. ;
Kremmer, S. ;
Guether, V. ;
Smarslyg, W. .
INTERMETALLICS, 2008, 16 (06) :827-833
[9]  
Deng ZH, 2013, RARE METAL MAT ENG, V42, P1356
[10]  
Dieter G.E., 1986, MECH METALLURGY
12345