The Research of the Surface Profile after Profiling of Inconel 738LC

被引：6
作者：
Kyncl, Jiri [1 ]
Beranek, Ladislav [1 ]
Kolarik, Kamil [2 ]
Pala, Z. [2 ]
机构：
[1] Czech Tech Univ, Dept Machining Proc Planning & Metrol, Fac Mech Engn, CR-16635 Prague, Czech Republic
[2] Czech Tech Univ, Fac Nucl Sci & Phys Engn, Dept Solid State Engn, Prague, Czech Republic
来源：
24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013 | 2014年 / 69卷
关键词：
inconel; 738; lc; superalloy; milling; machining; roughness;
D O I：
10.1016/j.proeng.2014.03.078
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Production of so-called superalloys is increasing in the present. This paper is about Inconel 738 LC. There are main mechanical properties as well as chemical composition of Inconel 738 LC in this paper. Special properties of superalloys cause, that they are very hard machining materials, mainly thanks to their high thermal stability during machining. For this reason it was necessary to measure the surface roughness after machining turbine blades made of Inconel 738LC depending on profiling. Roughing and finishing of Inconel 738 LC was used to get nearly the best parameters of the surface roughness. (C) 2014 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：974 / 979
页数：6
相关论文
共 14 条
  • [1] A. M. &. F. Group, 2012, ALL INF REP INC 738
  • [2] Cutting forces in the end milling of Inconel 718
    Alauddin, M
    Mazid, MA
    El Baradi, MA
    Hashmi, MSJ
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 77 (1-3) : 153 - 159
  • [3] Beranek L., 2011, ANN DAAAM 2011 P 22, P1323
  • [4] Chodhury I.-B.M., 1998, J MATER PROCESS TECH, P278
  • [5] Ginting A., 2009, TOOLS MANUF, V49, P325
  • [6] Hoesel D., 2011, ANN DAAAM 2011 P 22, P1323
  • [7] Janos M., 2012, ERIN 2012 C P
  • [8] Maly J, 2006, OBRABENI TEZKOOBROBI
  • [9] Marcos M., 2011, ANN DAAAM 2011 P 22, P1323
  • [10] Nickel development institute, 2011, MACH NICK ALL HDB
12