The impinging jet flow cell - a novel method for the study of PEM fuel cell material

被引：20
作者：
Koponen, U
Peltonen, T
Bergelin, M
Mennola, T
Valkiainen, M
Kaskimies, J
Wasberg, M
机构：
[1] Abo Akad Univ, Inorgan Chem Lab, FIN-20500 Turku, Finland
[2] Helsinki Univ Technol, Adv Energy Syst, FIN-02015 Helsinki, Finland
来源：
JOURNAL OF POWER SOURCES | 2000年 / 86卷 / 1-2期
关键词：
impinging jet; flow cell; fuel cell catalyst; Eu-modification; CO-tolerance;
D O I：
10.1016/S0378-7753(99)00497-8
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The electrocatalytic properties of a fuel cell catalyst ink in thin film form based on Vulcan XC72/Pt (30%) and Nafion was investigated by means of a flow cell of impinging jet type in flows of H-2, and H-2 + CO dissolved in H2SO4 electrolyte. CO adlayers of different coverages were produced by a dosing procedure and their electrooxidative removal was studied. Ru was deposited onto the ink in situ by electroreduction and the basic voltammetry of such electrodes was investigated as well as the influence on CO adlayers and CO-tolerance. A Nafion film on top of the ink film influenced both the behaviour of CO adlayers and GO-tolerance. The feasibility of the flow cell for investigation and modification of ink electrodes were demonstrated. (C) 2000 Elsevier Science S.A. All rights reserved.
引用
收藏
页码：261 / 268
页数：8
相关论文
共 50 条
  • [21] A comprehensive assessment on the durability of gas diffusion electrode materials in PEM fuel cell stack
    Arunkumar Jayakumar
    Frontiers in Energy, 2019, 13 : 325 - 338
  • [22] A comprehensive assessment on the durability of gas diffusion electrode materials in PEM fuel cell stack
    Jayakumar, Arunkumar
    FRONTIERS IN ENERGY, 2019, 13 (02) : 325 - 338
  • [23] Numerical and Experimental Study of Flow and Convective Heat Transfer on a Rotor of a Discoidal Machine With Eccentric Impinging Jet
    Haidar, Chadia
    Boutarfa, Rachid
    Sennoune, Mohamed
    Harmand, Souad
    JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS, 2020, 12 (02)
  • [24] A comparative study of passive control on flow structure evolution and convective heat transfer enhancement for impinging jet
    Du, Xuzhi
    Yang, Zhigang
    Jin, Zheyan
    Xia, Chao
    Bao, Di
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 126 : 256 - 280
  • [25] Nonlinear frequency response analysis for the diagnosis of carbon monoxide poisoning in PEM fuel cell anodes
    Kadyk, Thomas
    Hanke-Rauschenbach, Richard
    Sundmacher, Kai
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 2011, 41 (09) : 1021 - 1032
  • [26] Kinetic study of CO desorption from PtRu/C PEM fuel cell anodes: Temperature dependence and associated microstructural transformations
    Pitois, A.
    Davies, J. C.
    Pilenga, A.
    Pfrang, A.
    Tsotridis, G.
    JOURNAL OF CATALYSIS, 2009, 265 (02) : 199 - 208
  • [27] Continuous flow synthesis of nanostructured bimetallic Pt-Mo/C catalysts in milli-channel reactor for PEM fuel cell application
    Pillai, Sruthi R.
    Sonawane, Shirish H.
    Gumfekar, Sarang P.
    Suryawanshi, Prashant L.
    Ashokkumar, Muthupandian
    Potoroko, Irina
    MATERIALS CHEMISTRY AND PHYSICS, 2019, 237
  • [28] Experimental study of the turbulent flow around a single wall-mounted prism obstacle placed in a cross-flow and an impinging jet
    Masip, Y.
    Rivas, A.
    Bengoechea, A.
    Anton, R.
    Larraona, G. S.
    Ramos, J. C.
    ADVANCES IN FLUID MECHANICS VIII, 2010, : 569 - +
  • [29] An advanced power converter topology to significantly improve the CO tolerance of the PEM fuel cell power systems
    Choi, W
    Enjeti, PN
    Appleby, AJ
    CONFERENCE RECORD OF THE 2004 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-4: COVERING THEORY TO PRACTICE, 2004, : 1185 - 1191
  • [30] RSM and (ν2)over-bar-f study on the flow behaviour of an impinging jet in a cross-flow on a wall-mounted cube
    Rundstrom, D.
    Moshfegh, B.
    PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 2007, 7 (06): : 311 - 322
12345