The influence of size and composition on the creep of SnAgCu solder joints

被引：0
作者：
Wiese, S. [1 ]
Roellig, M. [1 ]
Mueller, M. [1 ]
Rzepka, S. [2 ,3 ]
Nocke, K. [2 ,3 ]
Luhmann, C. [2 ,3 ]
Kraemer, F. [1 ]
Meier, K. [1 ]
Wolter, K. -J. [1 ]
机构：
[1] Tech Univ Dresden, Elect Packaging Lab, D-8027 Dresden, Germany
[2] Qimonda Dresden GmbH & Co OHG, Dresden, Germany
[3] Tech Univ Dresden, IAVT, D-01062 Dresden, Germany
来源：
ESTC 2006: 1ST ELECTRONICS SYSTEMINTEGRATION TECHNOLOGY CONFERENCE, VOLS 1 AND 2, PROCEEDINGS | 2006年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The paper presents creep data, that was gained on non eutectic SnAgCu-solder specimens with a variety of compositions. The non eutectic SnAgCu-Alloys were tested in different specimen sizes: bulk specimens, FBGA solder balls, flip chip solder joints. The results of the creep experiments show that both, solder alloy composition and solder joint size have a significant influence of the creep properties of the solder material. Bulk solder specimens have a rectangular cross section of 4mm X 3mm and contained the following alloys: Sn98Ag2, Sn97Ag3, Sn96Ag4, Sn97.5Ag2Cu0.5, Sn97.1Ag2Cu0.9, Sn98.8Ag2Cu1.2, Sn965Ag3Cu0.5, Sn96.1Ag3Cu0.9, Sn95.8Ag3Cu1.2, Sn96.9Ag3Au0.1. FBGA solder balls contained three non eutectic alloys with a content of 0,5% < Ag < 4% and 0,2% < Cu < 0,8%. Flip chip solder joints contained an eutectic Sn96.5Ag3.5 alloy and an non-eutectic SnAg alloy with Ag < 3%. Creep experiments have been carried out in a temperature range between T = 5 degrees C... 150 degrees C. The microstructures of the various solder specimens have been analysed to understand their differences in creep behavior.
引用
收藏
页码：912 / +
页数：3
相关论文
共 50 条
[21]   Effect of primary creep and plasticity in the modeling of thermal fatigue of SnPb and SnAgCu solder joints [J].
Shirley, Dwayne R. ;
Ghorbani, Hamid R. ;
Spelt, Jan K. .
MICROELECTRONICS RELIABILITY, 2008, 48 (03) :455-470
[22]   Influence of the Substrate on the Creep of SN Solder Joints [J].
Lee, K. -O. ;
Morris, J. W., Jr. ;
Hua, F. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (07) :1805-1814
[23]   Influence of Thermal Ageing on Long Term Reliability of SnAgCu Solder Joints [J].
Dompierre, B. ;
Aubin, V. ;
Charkaluk, E. ;
Maia Filho, W. C. ;
Brizoux, M. .
EUROSIME 2009: THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICRO-ELECTRONICS AND MICRO-SYSTEMS, 2009, :342-347
[24]   Mechanical and microstructural properties of SnAgCu solder joints [J].
Sundelin, JJ ;
Nurmi, ST ;
Lepistö, TK ;
Ristolainen, EO .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 420 (1-2) :55-62
[25]   Mechanical behaviour of grains in SnAgCu solder joints [J].
Gong, Jicheng ;
Liu, Changqing ;
Conway, Paul P. ;
Silberschmidt, Vadim V. .
2006 INTERNATIONAL CONFERENCE ON ELECTRONIC MATERIALS AND PACKAGING, VOLS 1-3, 2006, :230-250
[26]   Electromigration reliability of SnAgCu solder joints in WLCSP [J].
Zhang, Jiou ;
Zhang, Xiu ;
Liu, Mengqi ;
Tian, Fuyou ;
Chen, Si ;
Xiao, Fei .
2024 25TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2024,
[27]   Influence of rapid thermal cycling on the microstructures of single SnAgCu and SnPb solder joints [J].
Chen, Jibing ;
Lv, Weiwen ;
An, Bing ;
Zhou, Longzao ;
Wu, Yiping .
2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, :848-+
[28]   Effect of Cu grain size on the voiding propensity at the interface of SnAgCu/Cu solder joints [J].
Li, Hailong ;
An, Rong ;
Wang, Chunqing ;
Tian, Yanhong ;
Jiang, Zhi .
MATERIALS LETTERS, 2015, 144 :97-99
[29]   The influence of solder composition on the development of microstructures in magnesium solder joints [J].
Wielage, B ;
Mücklich, S .
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2005, 42 (10) :513-527
[30]   Dorn Creep Model and Finite Element Simulation of SnAgCu-CNT Solder Joints in FCBGA Device [J].
Zhang, Liang ;
Sun, Lei ;
Han, Lei ;
Guo, Yong-huan .
INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION, 2014, 15 (05) :329-335
12345