Finite element analysis of mechanical properties of woven composites through a micromechanics model

被引:9
作者
Khan, Haris A. [1 ]
Hassan, Abid [2 ]
Saeed, M. B. [1 ]
Mazhar, Farrukh [1 ]
Chaudhary, Imran A. [1 ]
机构
[1] Natl Univ Sci & Technol, H 12, Islamabad, Pakistan
[2] Air Univ, E-9, Islamabad, Pakistan
关键词
finite element analysis (FEA); mechanical properties; microscale modeling; plain weave; textile composites; PLAIN-WEAVE FABRICS; ELASTIC BEHAVIOR; UNIT CELLS; FAILURE;
D O I
10.1515/secm-2014-0266
中图分类号
TB33 [复合材料];
学科分类号
摘要
In a woven fabric composite, arrangement and behavior of the fibers contained in the yarn and the yarns themselves lead to an intricate deformation mechanism. The current research, therefore, intends to propose a simplified mathematical micromechanics model for calculating mechanical properties of the plain weave composite using finite element analysis (FEA). A repetitive volume element (RVE) cell approach has been adopted for properties evaluation of plain weave composites. The FEA allows the modeling and portrayal of fabrics by taking into account various geometric parameters such as the yarn undulation, the probability of existence of consonances in a unit cell and interaction between warp and fill tows. These factors help in generating a mesh close to the actual fabric/composite. Additionally, a technique to represent the internal layout of composite structure employing actual dimensions of yarn geometry using conventional measurement devices, rather than using the demanding method of obtaining measurements from photomicrographs of sectioned laminates, is also proposed. The geometric symmetries as reported in the available literature were also incorporated during the model formulation. The theory of comparative displacements was then used to construe these symmetries into appropriate mechanical terms. Consequently, this leads to the formulation of boundary conditions for the RVE. The proposed finite element micromechanics model is different from the existing models in a way that it defines the yarn cross-sectional path based upon computational fluid dynamics technique rather than conventionally obtained photomicrographic results or the proposed sinusoidal paths by various researchers. Experiments were then performed on the laminates used for obtaining the geometric parameters with the aim of supporting the validity of the suggested model. The results of computational analysis were found to be in good agreement with the outcomes of experimental investigation.
引用
收藏
页码:87 / 99
页数:13
相关论文
共 50 条
[31]   Mechanical properties test and finite element analysis for litchi [J].
Chen Y. ;
Cai W. ;
Zou X. ;
Xiang H. ;
Liu T. ;
Xu F. .
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2011, 27 (12) :358-363
[32]   FINITE ELEMENT ANALYSIS OF WEFT KNITTED COMPOSITES [J].
Harjkova, Galina ;
Akishins, Pavels ;
Kononova, Olga .
CIVIL ENGINEERING '13, PT I, 2013, 4 :82-85
[33]   Investigation on the effect of interface properties on compressive failure behavior of 3D woven composites through micromechanics-based multiscale damage model [J].
Zheng, Tao ;
Guo, Licheng ;
Sun, Ruijian ;
Wang, Tongtong ;
Hong, Changqing ;
Benedictus, Rinze ;
Pascoe, John-Alan .
COMPOSITE STRUCTURES, 2023, 320
[34]   Computational micro-mechanical model of flexible woven fabric for finite element impact simulation [J].
Tabiei, A ;
Ivanov, I .
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2002, 53 (06) :1259-1276
[35]   Micromechanics and finite element approaches on the influence of fibre irregular surface and debonding on the elastic properties of jute/epoxy composites [J].
Phani, Prasanthi ;
Gujjala, Raghavendra ;
Ojha, Shakuntala ;
Bandaru, Aswani Kumar .
COMPOSITE INTERFACES, 2024, 31 (04) :417-439
[36]   Finite Element Analysis of Mechanical Properties of 3D Surface-Core Braided Composites [J].
Sun, Jin ;
Wang, Yu ;
Zhou, Guangming ;
Wang, Xinwei .
POLYMER COMPOSITES, 2018, 39 (04) :1076-1088
[37]   The mechanical properties of 3D woven composites [J].
Umer, R. ;
Alhussein, H. ;
Zhou, J. ;
Cantwell, W. J. .
JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (12) :1703-1716
[38]   Geometry effect on mechanical properties of woven fabric composites [J].
KIM Myungsoo ;
SONG Jung-Il .
JournalofCentralSouthUniversityofTechnology, 2011, 18 (06) :1985-1993
[39]   Mechanical Properties of Woven Mat Jute/Epoxy Composites [J].
Ferreira, Jose Martins ;
Capela, Carlos ;
Manaia, Joao ;
Costa, Jose Domingos .
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2016, 19 (03) :702-710
[40]   Geometry effect on mechanical properties of woven fabric composites [J].
Kim, Myungsoo ;
Song, Jung-Il .
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2011, 18 (06) :1985-1993