Nanochemistry, nanostructure, and electrical properties of Ta2O5 film deposited by atomic layer deposition and plasma-enhanced atomic layer deposition
被引:12
作者:
Gu, Diefeng
论文数: 0引用数: 0
h-index: 0
机构:
Arizona State Univ, Sch Mat, Tempe, AZ 85287 USAArizona State Univ, Sch Mat, Tempe, AZ 85287 USA
Gu, Diefeng
[1
]
Li, Jing
论文数: 0引用数: 0
h-index: 0
机构:Arizona State Univ, Sch Mat, Tempe, AZ 85287 USA
Li, Jing
Dey, Sandwip K.
论文数: 0引用数: 0
h-index: 0
机构:Arizona State Univ, Sch Mat, Tempe, AZ 85287 USA
Dey, Sandwip K.
De Waard, Henk
论文数: 0引用数: 0
h-index: 0
机构:Arizona State Univ, Sch Mat, Tempe, AZ 85287 USA
De Waard, Henk
Marcus, Steven
论文数: 0引用数: 0
h-index: 0
机构:Arizona State Univ, Sch Mat, Tempe, AZ 85287 USA
Marcus, Steven
机构:
[1] Arizona State Univ, Sch Mat, Tempe, AZ 85287 USA
[2] Arizona State Univ, Dept Elect Engn, Tempe, AZ 85287 USA
[3] ASM Amer Inc, Phoenix, AZ 85034 USA
来源:
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B
|
2006年
/
24卷
/
05期
关键词:
D O I:
10.1116/1.2335432
中图分类号:
TM [电工技术];
TN [电子技术、通信技术];
学科分类号:
0808 ;
0809 ;
摘要:
Ta2O5 films were deposited by plasma-enhanced atomic layer deposition (PEALD) and thermal ALD on native oxide surface (SiOx/Si). The properties of as-deposited and forming gas annealed films were examined and qualitatively compared with respect to nanostructural, nanochemical, capacitance-voltage and leakage-current-voltage (J(L)-V), and oxide breakdown characteristics. Although high-resolution transmission electron microscopy showed structurally sharp Ta2O5/SiOx interfaces in forming gas annealed PEALD Ta2O5/SiOx/Si stacks, electron energy loss spectroscopy revealed interdiffusion of Ta and Si across this interface, the indiffusion length of Ta being higher than the outdiffusion length of Si. The consequent formation and enhancement of Ta-O-Si bond linkages in thicker Ta2O5 films were clearly reflected in the J(L)-V data. Moreover, the fixed charge density (Qf = 5 X 10(11) q C/cm(-2)) was thickness invariant in PEALD Ta2O5. For similar PEALD and ALD Ta2O5 thickness in Ta2O5/SiOx/Si stacks, the latter showed a lower D-it and higher defect density, results attributed to protons and hydroxyl groups, respectively, which stem from water used as an oxidant for the thermal ALD process. (c) 2006 American Vacuum Society.