Influence of Valve's Characteristic on Total Performance of Three Cylinders Internal Combustion Water Pump

被引:11
作者
Zhang Hongxin [1 ]
Zhang Tiezhu [2 ]
Wang Weichao [2 ]
机构
[1] Qingdao Univ, Coll Mech & Elect Engn, Qingdao 266071, Peoples R China
[2] Qingdao Univ, Elect Teehnol Inst Vehicle, Qingdao 266071, Peoples R China
基金
中国国家自然科学基金;
关键词
internal combustion engine; water pump; valve; model; performance;
D O I
10.3901/CJME.2009.01.091
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Intenal combustion pump (ICP) is a new type power device turning the thermal energy from fuel combustion into fluid pressure energy. Three cylinders prototype has just been developed. The study on the influence of valve's characteristic on ICP's total performance will found the base for its optimum design. Based on the theoretical and testing fruits of single cylinder prototype, the performance of the valves and complete appliance of the latest is simulated. When the natural frequency of valves is approximately to the round number times of the working frequency, volumetric efficiency is seriously low. The nominal rotational speed of the prototype is nearly to the speed where the volumetric efficiency is lowest, which is harmful to the normal work of ICP, so further structure optimization of valves should be carried out. The change Of volumetric efficiency has great influence on the fuel consumption rate, Output flow, effective thermal efficiency, effective power, and so on, but little on output pressure.
引用
收藏
页码:91 / 96
页数:6
相关论文
共 9 条
[1]  
Dai Zuoqiang, 2006, Chinese Journal of Mechanical Engineering, V42, P51, DOI 10.3901/JME.2006.06.051
[2]  
Xiao Jingqi, 2007, China Mechanical Engineering, V18, P719
[3]  
Zhang Gang-hua, 2007, Yingyong Shengtai Xuebao, V18, P742
[4]  
[张洪信 ZHANG Hongxin], 2007, [流体机械, Fluid Machinery], V35, P1
[5]  
Zhang Hongxin, 2006, CHINA MECH ENG, V17, P292
[6]  
ZHANG HX, 2005, CHINESE J MECH ENG
[7]  
Zhang Jizhong, 2005, China Mechanical Engineering, V16, P1881
[8]  
Zhang Tiezhu, 2006, Chinese Journal of Mechanical Engineering, V42, P169, DOI 10.3901/JME.2006.05.169
[9]  
Zhao Hong, 2006, China Mechanical Engineering, V17, P949