Vehicle dynamic analysis and evaluation of continuously controlled semi-active suspensions using hardware-in-the-loop simulation

被引：18
|
作者：
Hwang, SH
Heo, SJ
Kim, HS
Lee, KI
机构：
[1] Prod. System and Engineering Center, Korea Inst. of Industrial Technology, Kumchon-Ku, Seoul 153-020, 371-36, Kasan-Dong
[2] Dept. of Mech. Des. and Prod. Eng., Seoul National University, Kwanak-Ku, Seoul 151-742, San 56-1, Shinrim-Dong
[3] Department of Automotive Engineering, Kookmin University, Songbuk-Ku, Seoul 136-702, 861-1, Chongnung-Dong
[4] Korea Inst. of Industrial Technology, Kumchon-Ku, Seoul 153-020, 371-36, Kasan-Dong
来源：
VEHICLE SYSTEM DYNAMICS | 1997年 / 27卷 / 5-6期
关键词：
D O I：
10.1080/00423119708969340
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A semi-active suspension system with continuously variable damper is greatly expected to be used mainly in the future as a high-performance suspension system due to its cost-effectiveness, light weight, and low energy consumption. In this paper, to develop a suitable control logic for the semi-active suspension system, the hardware-in-the-loop simulation is performed for the experimental continuously variable damper combined with a quarter-car model, and the simulation results are compared for passive, on/off controlled, and continuously controlled dampers in the aspects of ride comfort and driving safety, assuming each damper to be installed on the vehicle.
引用
收藏
页码：423 / 434
页数：12
相关论文
共 50 条
  • [41] Dynamic emulation of space robot in one-g environment using hardware-in-the-loop simulation
    Piedboeuf, JC
    Aghili, F
    Doyon, A
    Martin, E
    ROMANSY 14 - THEORY AND PRACTICE OF ROBOTS AND MANIPULATORS, 2002, (438): : 213 - 229
  • [42] Performance Analysis and Evaluation of a Multifunctional Grid-Connected PV System using Power Hardware-in-the-Loop Simulation
    Seo, Hyo-Ryong
    Park, Minwon
    Yu, In-Keun
    Song, Byeong-Mun
    2011 TWENTY-SIXTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC), 2011, : 1945 - 1948
  • [43] Simulation and analysis on semi-active control technology of multi-axle vehicle suspension
    Beihang University, Beijing 100083, China
    Nongye Jixie Xuebao, 2008, 8 (33-37+61):
  • [44] Full-Scale Power Hardware-In-the-Loop Simulation of an Electric Vehicle using Energetic Macroscopic Representation
    Depature, Clement
    Jokela, Tommi
    Lhomme, Walter
    Bouscayrol, Alain
    Boulon, Loic
    Sicard, Pierre
    Belahcen, Anouar
    2015 IEEE VEHICLE POWER AND PROPULSION CONFERENCE (VPPC), 2015,
  • [45] Analysis of semi-active vehicle suspension system using airspring and MR damper
    Tesfay, A. H.
    Goel, V. K.
    3RD INTERNATIONAL CONFERENCE OF MECHANICAL ENGINEERING RESEARCH (ICMER 2015), 2015, 100
  • [46] Dynamic response analysis of railway passenger car with flexible carbody model based on semi-active suspensions
    Wu, PB
    Zeng, J
    Dai, HY
    DYNAMICS OF VEHICLES ON ROADS AND ON TRACKS, 2003, : 774 - 783
  • [47] Non-dimensionalised closed-form parametric analysis of semi-active vehicle suspensions using a quarter-car model
    Ahmadian, Mehdi
    Blanchard, Emmanuel
    VEHICLE SYSTEM DYNAMICS, 2011, 49 (1-2) : 219 - 235
  • [48] Parameterized Design and Dynamic Analysis of a Reusable Launch Vehicle Landing System with Semi-Active Control
    Wang, Chen
    Chen, Jinbao
    Jia, Shan
    Chen, Heng
    SYMMETRY-BASEL, 2020, 12 (09):
  • [49] Semi-active suspension analysis with software in the loop" technique using an integrated handling/comfort multi-body vehicle model
    Stefanini, A
    Camuffo, I
    Turco, R
    TIRES, CHASSIS, ROADS, 2001, 1632 : 303 - 315
  • [50] Semi-active suspension analysis with software in the loop technique using an integrated handling/comfort multi-body vehicle model
    Stefanini, Andrea
    Camuffo, I.
    Turco, P.
    VDI Berichte, 2001, (1632): : 303 - 315
12345