Nanoparticle engineering for gas sensor optimisation:: improved sol-gel fabricated nanocrystalline SnO2 thick film gas sensor for NO2 detection by calcination, catalytic metal introduction and grinding treatments

The control of the technological steps such as calcination temperature and introduction of catalytic additives are accepted to be key points in the obtaining of improved sol-gel fabricated SnO2 thick film gas sensors with different sensitivity to NO2 and CO. in this work, after proving that the undoped material calcined at 1000 degrees C is optimum for NO2 detection, grinding is added as third technological step for further modification of particle surface characteristics, allowing to reduce cross-sensitivity to CO. The influence of grinding on the base resistance and on the sensor signals to NO2 and CO is discussed in detail as a function of the structural differences of the sensing material. (C) 1999 Elsevier Science S.A. All rights reserved.