Chemical properties of solid biofuels -: significance and impact

被引:608
作者
Obernberger, Ingwald [1 ]
Brunner, Thomas [1 ]
Baernthaler, Georg [1 ]
机构
[1] Graz Univ Technol, Inst Resource Efficient & Sustainable Syst, A-8010 Graz, Austria
关键词
biomass combustion; solid biofuels; chemical fuel properties;
D O I
10.1016/j.biombioe.2006.06.011
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
The chemical composition of solid biofuels (as defined in [Directive 2000/76/EC of the European Parliament and of the Council on the Incineration of Waste. In: European Commission, editor. Official Journal of the European Communities, vol. L 332; 2000. p. 91-111] and [CEN/TC 335-WG2 N94. Final draft. European Committee for standardization, editor. Solid biofuels-fuel specifications and classes. Brussels, Belgium; 2003.] has manifold effects on their thermal utilisation. C, H and O are the main components of solid biofuels and are of special relevance for the gross calorific value, H in addition also for the net calorific value. The fuel N content is responsible for NO, formation. NO, emissions belong to the main environmental impact factors of solid biofuel combustion. Cl and S are responsible for deposit formation and corrosion and are therefore relevant for a high plant availability. Furthermore, Cl causes HCl as well as PCDD/F and S SO, emissions and both elements are involved in the formation of aerosols (submicron particle emissions). The ash content influences the choice of the appropriate combustion technology and influences deposit formation, fly ash emissions and the logistics concerning ash storage and ash utilisation/disposal. Major ash forming elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti) are of relevance for the ash melting behaviour, deposit formation and corrosion. In addition, volatile elements such as Na and K are main constituents of aerosols. Volatile minor elements (As, Cd, Hg, Pb, Zn) play a major role in gaseous and especially aerosol emissions as well as in deposit formation, corrosion and ash utilisation/disposal. Either partly or non-volatile minor elements (Ba, Co, Cr, Cu, Mo, Mn, V) are of special relevance for ash utilisation. The present paper discusses the influence of chemical fuel properties on biomass combustion plants as well as possibilities and recommendations for controlling them. (c) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码:973 / 982
页数:10
相关论文
共 37 条
[1]  
[Anonymous], SCRIPT LECT THERMOCH
[2]  
BRUNNER T, 1998, P 10 EUR BIOEN C WUR, P1630
[3]  
BRUNNER T, 2002, P 12 EUR BIOM C, V1, P685
[4]  
Christensen K.A., 1995, THESIS TU DENMARK
[5]  
*EUR COMM STAND, 2003, SOL BIOF FUEL SPEC C
[6]  
Fenimore C.P., 1971, P COMBUST INST, V13, P373, DOI [10.1016/S0082-0784(71)80040-1, DOI 10.1016/S0082-0784(71)80040-1]
[7]  
KELLER R, 1994, 18 ETH ZUR LAB EN
[8]   Investigation on organic pollutants from a domestic heating system using various solid biofuels [J].
Launhardt, T ;
Thoma, H .
CHEMOSPHERE, 2000, 40 (9-11) :1149-1157
[9]   GASEOUS EMISSIONS FROM CIRCULATING FLUIDIZED-BED COMBUSTION OF WOOD [J].
LECKNER, B ;
KARLSSON, M .
BIOMASS & BIOENERGY, 1993, 4 (05) :379-389
[10]  
LINDT T, 1998, SERIES THERMAL BIOMA, V3, P155