Mesoscale simulation of pull-out performance for corroded reinforcement with stirrup confinement in concrete by 3D RBSM

The confining effect of concrete cover and stirrups reduces the rate of bond deterioration due to corrosion. However, the large dispersion in recorded experimental data makes it difficult to clearly separate the influence of cover depth and stirrup confinement on bond degradation. This study utilises the discrete 3D Rigid Body Spring Model (RBSM) to conduct a meso-scale investigation regarding the effect of cover thickness and stirrup confinement on internal crack evolution and pull-out behaviour in corroded reinforced concrete models. The simulation scheme is divided into two stages. In stage 1, different degrees of corrosion are introduced, producing cracking in the cover concrete; in stage 2, the corroded main reinforcement is pulled out from the damaged concrete. 3D RBSM is advantageous because the concrete is randomly meshed to reduce mesh bias on crack propagation and the actual geometry of the deformed bars is modelled. The simulation results clarify that the presence of thicker cover delays crack initiation but increases the rate of crack opening. Stirrups do not have any significant effect on crack initiation but effectively restrict crack growth. An investigation of the internal stress in the simulation models shows that tensile stresses generated in stirrups during corrosion are responsible for reactionary confining pressure that restricts crack propagation. Load-displacement curves show reductions in pull-out capacity, stiffness and ductility with increasing corrosion damage. The relative influence of crack opening and stirrup volume on the rate of bond degradation with respect to average surface crack width are discussed and compared with published experimental results and an empirical equation.