Thermo-Economic Performance Evaluation of a Conical Solar Concentrating System Using Coil-Based Absorber

Pollution and the increase in greenhouse gas (GHG) emissions have long been linked to the world's increasing need for fossil fuels to generate energy. Every day, the energy consumption is increasing; therefore, it is important to improve technologies that use renewable energy sources. With the abundant availability of sustainable energy, solar power is becoming a necessity. However, solar energy has a low energy density and therefore requires a large installation area, which requires heat collection and heat storage technology. Much research is now being done on the conical solar systems to improve efficiency including calculating an optimal cone angle, finding the best flow ratio and the best absorber design, etc. Therefore, in this study, thermal performance of a conical solar collector (CSC) was assessed with a new design of concentric tube absorber (addition of a coil) and compared to the existing circular tube absorber. It was found that 6 L/min flow rate of heating medium (distilled water and CuO nanofluid) gave lower payback period and higher solar fraction of the system in both cases of absorber tube, i.e., without coil and with coil. However, comparatively, thermal efficiency of CSC with coil-based absorber was almost 10-12% higher than conventional system (without coil) regardless of type of heating medium used.