PROPERTIES OF GAS AND CHAR FROM MICROWAVE PYROLYSIS OF PINE SAWDUST

Pine sawdust pyrolysis was carried out respectively using microwave and conventional electrical heating at different temperatures in order to understand the properties of pyrolytic products from microwave pyrolysis of biomass. Less char material was obtained by microwave pyrolysis compared to conventional heating at the same temperature. While comparing the components of the pyrolytic gases, it was revealed that the microwave pyrolysis gas usually had higher H-2 and CO contents and lower CH4 and CO2 contents than those obtained by conventional pyrolysis at the same temperature. The texture analysis results of the microwave pyrolysis chars showed that the chars would melt and the pores would shrink at high temperatures, and hence, the specific surface areas of the chars decreased with increasing temperature. Similarly, the reactivity of the char was remarkably reduced when the microwave pyrolysis temperature exceeded 600 degrees C.