Production of Nanosized Boron Oxide Powder by High-Energy Ball Milling

被引：20

作者：

Alizadeh, Mohammad ^{[1
]}

Sharifianjazi, Fariborz ^{[1
,2
]}

Haghshenasjazi, Ehsan ^{[3
]}

Aghakhani, Masood ^{[4
]}

Rajabi, Laleh ^{[5
]}

机构：

[1] Islamic Azad Univ, Sci & Res Branch, Dept Mech Engn, Kermanshah, Iran

[2] Amirkabir Univ Technol, Min & Met Engn Dept, Tehran, Iran

[3] KN Toosi Univ Technol, Dept Mech Engn, Tehran, Iran

[4] Razi Univ, Dept Mech Engn, Welding Res Ctr, Kermanshah, Iran

[5] Razi Univ, Dept Chem Engn, Polymer Res Ctr, Kermanshah, Iran

来源：

SYNTHESIS AND REACTIVITY IN INORGANIC METAL-ORGANIC AND NANO-METAL CHEMISTRY | 2015年 / 45卷 / 01期

关键词：

ball milling; boron oxide; nanosize; production;

D O I：

10.1080/15533174.2013.797438

中图分类号：

O61 [无机化学];

学科分类号：

070301 ; 081704 ;

摘要：

In this research, an attempt has been made to modify the microsized B2O3 powder into nanosized B2O3 powder using ball mill. The sample was taken out after various hours of milling and it was characterized for the crystallite size. The crystallite size was > 100, 30, and 19 nm in 0, 1, and 5 h of milling time, respectively. The experimental results showed that the size of the nanostructure of particles for the total duration of 5 h was in the range of 24-95 nm. The shape of the 5 h milled particles was round and the surface morphology is rough.

引用

页码：11 / 14

页数：4

共 19 条

[1] Microstructure, strength and CO2 separation characteristics of α-alumina supported γ-alumina thin film membrane
Abedini, S.
Parvin, N.
Ashtari, P.
Jazi, F. S.
[J]. ADVANCES IN APPLIED CERAMICS, 2013, 112 (01) : 17 - 22
[2] Structural evaluation and mechanical properties of nanostructured Al/B4C composite fabricated by ARB process
Afizadeh, Morteza
Paydar, M. H.
Jazi, F. Sharifian
[J]. COMPOSITES PART B-ENGINEERING, 2013, 44 (01) : 339 - 343
[3] Synthesis of nanosized titanium powder by high energy milling
Dabhade, VV
Mohan, TRR
Ramakrishnan, P
[J]. APPLIED SURFACE SCIENCE, 2001, 182 (3-4) : 390 - 393
[4] Preparation of 50Ni-45Ti-5Zr powders by high-energy ball milling and hot pressing
de Alcantara Abdala, Julia Marinzeck
Fernandes, Bruno Bacci
dos Santos, Dalcy Roberto
Rodrigues Henriques, Vinicius Andre
de Moura Neto, Carlos
Ramos, Alfeu Saraiva
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 495 (02) : 423 - 427
[5] Grabis J., 2012, MAT SCI, V18
[6] Haghshenas Jazi E., 2013, SYNTH REACT IN PRESS
[7] Preparation of TiB2 powders by mechanical alloying
Hwang, Y
Lee, JK
[J]. MATERIALS LETTERS, 2002, 54 (01) : 1 - 7
[8] Preparation of Al-Fe/TiB2 nanocomposite powder by ball milling and subsequent heat treatment
Jazi, E. Haghshenas
Borhani, G.
Farsani, R. Esalmi
[J]. MICRO & NANO LETTERS, 2012, 7 (05): : 448 - 452
[9] Jazi F. S., ADV APPL CE IN PRESS
[10] Jazi FS, 2012, J CERAM PROCESS RES, V13, P523

← 1 2 →