Microstructure evolution during electromigration in eutectic SnPb solder bumps

被引：2

作者：

Lu, CM ^{[1
]}

Shao, TL ^{[1
]}

Yang, CJ ^{[1
]}

Chen, C ^{[1
]}

机构：

[1] Natl Chiao Tung Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan

来源：

JOURNAL OF MATERIALS RESEARCH | 2004年 / 19卷 / 08期

关键词：

D O I：

10.1557/JMR.2004.0305

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A technique has been developed to facilitate analysis of the microstructural evolution of solder bumps after current stressing. Eutectic SnPb solders were connected to under-bump metallization (UBM) of Ti/Cr-Cu/Cu and pad metallization of Cu/Ni/Au. It was found that the Cu6Sn5 compounds on the cathode/chip side dissolved after the current stressing by 5 x 10(3) A/cm(2) at 150 degreesC for 218 h. However, on the anode/chip side, they were transformed into (NixCu1-x)(3)Sn-4 in the center region of the UBM, and they were converted into (Cu-y,Ni1-y)(6)Sn-5 on the periphery of the UBM. For both cathode/substrate and anode/substrate ends, (Cu-y,Ni1-y)(6)Sn-5 compounds were transformed into (Ni-x,Cu1-x)(3)Sn-4. In addition, the bumps failed at cathode/chip end due to serious damage of the UBM and the Al pad. A failure mechanism induced by electromigration is proposed in this paper.

引用

页码：2394 / 2401

页数：8

共 50 条

[31] Electromigration of eutectic SnPb and SnAg3.8Cu0.7 flip chip solder bumps and under-bump metallization [J].

Lee, TY ;

Tu, KN ;

Frear, DR .

JOURNAL OF APPLIED PHYSICS, 2001, 90 (09) :4502-4508

[32] Emerging issues in the physics and control of electromigration in SnPb and Pb-free solder bumps [J].

Rinne, GA .

PROCEEDINGS OF 5TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, 2003, :72-76

[33] Evolution of Microstructure and Morphology of Eutectic SnBi Solder Joint During Electromigration Process at High Temperature [J].

He Hongwen ;

Xu Guangchen ;

Guo Fu .

RARE METAL MATERIALS AND ENGINEERING, 2010, 39 :251-254

[34] Electromigration induced microstructure and morphological changes in eutectic SnPb solderjoints [J].

Lee, A. ;

Ho, C. E. ;

Subramanian, K. N. .

JOURNAL OF MATERIALS RESEARCH, 2007, 22 (11) :3265-3272

[35] Study of electromigration in eutectic SnPb solder stripes using the edge displacement method [J].

C. K. Chou ;

Y. C. Hsu ;

Chih Chen .

Journal of Electronic Materials, 2006, 35 :1655-1659

[36] Study of electromigration in eutectic SnPb solder stripes using the edge displacement method [J].

Chou, C. K. ;

Hsu, Y. C. ;

Chen, Chih .

JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (08) :1655-1659

[37] Electromigration Reliability of Solder Bumps [J].

Ceric, Hajdin ;

Selberherr, Siegfried .

2014 IEEE 21ST INTERNATIONAL SYMPOSIUM ON THE PHYSICAL AND FAILURE ANALYSIS OF INTEGRATED CIRCUITS (IPFA), 2014, :336-339

[38] Electromigration in WLCSP solder bumps [J].

Rinne, GA ;

Nair, KK ;

Roe, J .

2002 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, PROCEEDINGS, 2002, 4931 :662-667

[39] Electromigration in WLCSP solder bumps [J].

Ubachs, R. L. J. M. .

MICROELECTRONICS RELIABILITY, 2010, 50 (9-11) :1678-1683

[40] Electromigration-induced cracks in eutectic SnPb solder reaction couple at room temperature [J].

Xu, G. C. ;

He, H. W. ;

Guo, F. .

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2009, 20 (03) :276-282

← 1 2 3 4 5 →