A Statistical Evaluation of the Influence of Different Material and Process Parameters on the Heat Transfer Coefficient in Gravity Die Casting

被引：5

作者：

Wolff, Nino ^{[1
]}

Zimmermann, Golo ^{[1
]}

Vroomen, Uwe ^{[1
]}

Biihrig-Polaczek, Andreas ^{[1
]}

机构：

[1] Rhein Westfal TH Aachen, Inst Foundry, Intzestr 5, D-52072 Aachen, Germany

来源：

METALS | 2020年 / 10卷 / 10期

关键词：

gravity die casting; solidification; heat transfer; heat transfer coefficient; analysis of variance; AIR-GAP FORMATION; THERMAL CONTACT CONDUCTANCE; UNIDIRECTIONAL SOLIDIFICATION; INTERFACE; PRESSURE; TEMPERATURE; SIMULATION; MODEL;

D O I：

10.3390/met10101367

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Local heat transfer in gravity die casting is of great importance for precision in terms of distortion, mechanical properties, and the quality of the castings due to its effect on solidification. Depending on contact conditions such as liquid melt to solid mold, a gap between mold and component, or contact pressure between casting and mold as a result of shrinkage, there are very large differences in heat transfer. The influences of mold material, mold coating and its influence of aging, mold temperature control, and layout on the heat transfer coefficient (HTC) were investigated experimentally for different contact cases. The experiments were carried out on a rotationally symmetrical experimental setup with modular exchangeable die inserts and cores using an AlSi7Mg0.3 alloy. From the results of the individual test series, the quantitative shares of the above-mentioned influencing variables in the respective effective heat transfer coefficients were determined by means of analysis of variance. From this, the parameters having the most significant influence on the local heat balance were derived.

引用

页码：1 / 12

页数：12

共 28 条

[21] THE AIR-GAP FORMATION PROCESS AT THE CASTING-MOLD INTERFACE AND THE HEAT-TRANSFER MECHANISM THROUGH THE GAP [J].

NISHIDA, Y ;

DROSTE, W ;

ENGLER, S .

METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1986, 17 (04) :833-844

[22]

R Development Core Team, 2017, R LANG ENV STAT COMP

[23] EFFECT OF PRESSURE ON METAL-DIE HEAT-TRANSFER COEFFICIENT DURING SOLIDIFICATION [J].

SEKHAR, JA ;

ABBASCHIAN, GJ ;

MEHRABIAN, R .

MATERIALS SCIENCE AND ENGINEERING, 1979, 40 (01) :105-110

[24] Evaluation of heat transfer coefficients during upward and downward transient directional solidification of Al-Si alloys [J].

Spinelli, JE ;

Ferreira, IL ;

Garcia, A .

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2006, 31 (03) :241-248

[25] Influence of Die Temperature Control on Solidification and the Casting Process [J].

Vossel, T. ;

Wolff, N. ;

Pustal, B. ;

Buehrig-Polaczek, A. .

INTERNATIONAL JOURNAL OF METALCASTING, 2020, 14 (04) :907-925

[26] Development of an A356 die casting setup for determining the heat transfer coefficient depending on cooling conditions, gap size, and contact pressure [J].

Wolff, N. ;

Pustal, B. ;

Vossel, T. ;

Laschet, G. ;

Buehrig-Polaczek, A. .

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2017, 48 (12) :1235-1240

[27]

Wolff N., 2019, AFS T, V127, P309

[28]

Wolff N., 2019, P LIQ MET PROC CAST, P319

← 1 2 3 →