Multiple Performance characteristics Optimization in the Turning Process of AISI H13 Tool Steel using Taguchi and Fuzzy Logic

被引：0
作者：
Soepangkat, Bobby O. P. [1 ]
Pramujati, Bambang [1 ]
Karuniawan, Bayu W.
机构：
[1] Inst Teknol Sepuluh Nopember ITS, Dept Mech Engn, Mfg Proc Lab, Surabaya 60111, Indonesia
来源：
ADVANCES IN APPLIED MECHANICS AND MATERIALS | 2014年 / 493卷
关键词：
Fuzzy logics; Multiple performance characteristics; Taguchi method; Turning;
D O I：
10.4028/www.scientific.net/AMM.493.583
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper presents the application of Taguchi's method of orthogonal array and signal to noise ratio with logical fuzzy reasoning for multiple output optimization of turning AISI H13 steel using carbide tool. The cutting parameters, i.e., cutting speed, feed rate, depth of cut and nose radius, are optimized with considerations of multiple performance characteristics such as cutting force, feed force, surface roughness and tool flank wear. Experimental results are provided to illustrate the effectiveness of this approach.
引用
收藏
页码：583 / +
页数：2
相关论文
共 50 条
[41]   Optimization of process parameters in CNC turning of Titanium alloy with carbide coated tool inserts using grey based Taguchi analysis [J].
Kuppusamy, Sivasakthivel ;
Ramalingam, Dillibabu .
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2018, 12 (04)
[42]   Measurement, modelling and optimization of the average temperature at the tool work interface for turning of AISI 1040 steel using ANN-GA methodology [J].
Singh, Vishal Kumar ;
Kumar, Chandan ;
Besra, Govinda ;
Mukhopadhyay, Arkadeb ;
Barman, Manik .
ENGINEERING RESEARCH EXPRESS, 2021, 3 (03)
[43]   INFLUENCE OF CUTTING FLUID FLOW RATE AND CUTTING PARAMETERS ON THE SURFACE ROUGHNESS AND FLANK WEAR OF TiAlN COATED TOOL IN TURNING AISI 1015 STEEL USING TAGUCHI METHOD [J].
Moganapriya, C. ;
Rajasekar, R. ;
Ponappa, K. ;
Venkatesh, R. ;
Karthick, R. .
ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (03) :1827-1832
[44]   OPTIMIZATION OF THE DIE-SINKING MICRO-EDM PROCESS FOR MULTIPLE PERFORMANCE CHARACTERISTICS USING THE TAGUCHI-BASED GREY RELATIONAL ANALYSIS [J].
Kadirvel, Arumugam ;
Hariharan, Pillai .
MATERIALI IN TEHNOLOGIJE, 2014, 48 (01) :27-32
[45]   Optimization of Multiple Response Characteristics of EDM Process Using Taguchi-Based Grey Relational Analysis and Modified PSO [J].
Panda, S. ;
Mishra, D. ;
Biswal, B. B. ;
Nanda, P. .
JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2015, 14 (03) :123-148
[46]   Three Component Cutting Force System Modeling and Optimization in Turning of AISI D6 Tool Steel Using Design of Experiments and Neural Networks [J].
Vaxevanidis, Nikolaos M. ;
Kechagias, John D. ;
Fountas, Nikolaos A. ;
Manolakos, Dimitrios E. .
WORLD CONGRESS ON ENGINEERING - WCE 2013, VOL I, 2013, :629-+
[47]   Machinability assessment and optimization of turning AISI H11 steel under various minimum quantity lubrication (MQL) conditions using nanofluids [J].
Hamdi, Amine ;
Yapan, Yusuf Furkan ;
Uysal, Alper ;
Merghache, Sidi Mohammed .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 137 (7-8) :4089-4107
[48]   Machinability assessment and optimization of turning AISI H11 steel under various minimum quantity lubrication (MQL) conditions using nanofluids [J].
Amine Hamdi ;
Yusuf Furkan Yapan ;
Alper Uysal ;
Sidi Mohammed Merghache .
The International Journal of Advanced Manufacturing Technology, 2025, 137 (7) :4089-4107
[49]   Optimization of machining process parameters in CNC turning process of IS2062 E250 Steel using coated carbide cutting tool [J].
Krishnan, B. Radha ;
Ramesh, M. .
MATERIALS TODAY-PROCEEDINGS, 2020, 21 :346-350
[50]   Evaluation of the cutting performance of PVD, CVD and MTCVD carbide inserts in dry turning of AISI 4140 steel using RSM-based NAMDE optimization [J].
Billel Hamadi ;
Mohamed Athmane Yallese ;
Lakhdar Boulanouar ;
Abderazek Hammoudi ;
Mourad Nouioua .
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44
12345