Multiple Performance characteristics Optimization in the Turning Process of AISI H13 Tool Steel using Taguchi and Fuzzy Logic

被引：0

作者：

Soepangkat, Bobby O. P. ^{[1
]}

Pramujati, Bambang ^{[1
]}

Karuniawan, Bayu W.

机构：

[1] Inst Teknol Sepuluh Nopember ITS, Dept Mech Engn, Mfg Proc Lab, Surabaya 60111, Indonesia

来源：

ADVANCES IN APPLIED MECHANICS AND MATERIALS | 2014年 / 493卷

关键词：

Fuzzy logics; Multiple performance characteristics; Taguchi method; Turning;

D O I：

10.4028/www.scientific.net/AMM.493.583

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper presents the application of Taguchi's method of orthogonal array and signal to noise ratio with logical fuzzy reasoning for multiple output optimization of turning AISI H13 steel using carbide tool. The cutting parameters, i.e., cutting speed, feed rate, depth of cut and nose radius, are optimized with considerations of multiple performance characteristics such as cutting force, feed force, surface roughness and tool flank wear. Experimental results are provided to illustrate the effectiveness of this approach.

引用

页码：583 / +

页数：2

共 50 条

[21] Analysis on Influence of feed rate and tool geometry on cutting forces in turning using Taguchi method and Fuzzy Logic [J].

Venkataramaiah, P. ;

DharmaReddy, K. ;

Meramma, P. .

INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 :1692-1701

[22] Experimental and statistical investigation of electro-erosion machining performance of cryogenic treated hardened AISI H13 hot work tool steel [J].

Nas, Engin .

TRIBOLOGY INTERNATIONAL, 2024, 193

[23] Design Optimization of Cutting Parameters using Taguchi Method and ANOVA During High-speed Machining Hardened H13 Steel [J].

Zhang, S. ;

Guo, Y. B. .

ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL 1: ADVANCED MANUFACTURING TECHNOLOGY AND EQUIPMENT, AND MANUFACTURING SYSTEMS AND AUTOMATION, 2009, 626-627 :129-+

[24] OPTIMIZATION OF SURFACE ROUGHNESS OF AISI 304 AUSTENITIC STAINLESS STEEL IN DRY TURNING OPERATION USING TAGUCHI DESIGN METHOD [J].

Selvaraj, D. Philip ;

Chandramohan, P. .

JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2010, 5 (03) :293-301

[25] A comparison of the different multiple response optimization techniques for turning operation of AISI O1 tool steel [J].

Kataria, Ravinder ;

Kumar, Jatinder .

JOURNAL OF ENGINEERING RESEARCH, 2014, 2 (04) :161-184

[26] Optimization of TIG welding process parameters on 304 austenitic stainless steel sheet metal using fuzzy logic based Taguchi method [J].

Abebe, Demeyesus Gizaw ;

Bogale, Teshome Mulatie .

ENGINEERING RESEARCH EXPRESS, 2023, 5 (04)

[27] Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method [J].

Zerti, Oussama ;

Yallese, Mohamed Athmane ;

Khettabi, Riad ;

Chaoui, Kamel ;

Mabrouki, Tarek .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 89 (5-8) :1915-1934

[28] Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method [J].

Oussama Zerti ;

Mohamed Athmane Yallese ;

Riad Khettabi ;

Kamel Chaoui ;

Tarek Mabrouki .

The International Journal of Advanced Manufacturing Technology, 2017, 89 :1915-1934

[29] Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method [J].

Selvaraj, D. Philip ;

Chandramohan, P. ;

Mohanraj, M. .

MEASUREMENT, 2014, 49 :205-215

[30] Optimization of machining parameters in turning GFRP composites using a carbide (K10) tool based on the taguchi method with fuzzy logics [J].

K. Palanikumar ;

L. Karunamoorthy ;

R. Karthikeyan ;

B. Latha .

Metals and Materials International, 2006, 12 :483-491

← 1 2 3 4 5 →