Room-temperature preparation of TiO2/graphene composite photoanodes for efficient dye-sensitized solar cells

Semi-transparent TiO2/graphene photoanodes are prepared at room temperature via an electrophoretic deposition method followed by compression and applied in dye-sensitized solar cells (DSSCs). Compression enhances the power conversion efficiency (PCE) of a DSSC, which constitutes up 18.4 times improvement compared to the uncompressed device. Incorporating graphene into the compressed film further improves the PCE by 28.8%. Simultaneously, compressing and graphene incorporating can greatly increase the film's transmittance at long wavelengths, benefiting to the use of DSSCs as front unit in tandem solar cells. Scanning electron microscopy, porosity measurements, electrochemical impedance spectroscopy and open circuit voltage decay are performed to investigate the mechanisms. It is demonstrated that compressing a film can reduce the porosity and improve the inter-particle connections, which accounts for the increased light transmittance and enhanced PCE. The incorporated graphene can provide extra charge carrier pathway due to its excellent charge transport properties, as well as protect TiO2 nanostructure by preventing film cracking upon pressing due to its good flexibility, thus increases PCE to 6.75%, which, to our best knowledge, is the highest value among DSSCs with room-temperature prepared photoanodes. (C) 2020 Elsevier Inc. All rights reserved.