Effect of erodent properties on erosion wear of ductile type materials

被引:169
作者
Desale, Girish R. [1 ]
Gandhi, Bhupendra K. [1 ]
Jain, S. C. [1 ]
机构
[1] Indian Inst Technol, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India
关键词
slurry erosion; ductile material; density; shape factor; material removal mechanism;
D O I
10.1016/j.wear.2006.01.035
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The present work reports the effect of erodent properties on slurry erosion. Experiments have been performed in a pot tester to evaluate the wear of two ductile materials namely, AA6063 and AISI 304L steel. Solid-liquid mixtures of similar particle sizes of three different natural erodents namely, quartz, alumina and silicon carbide have been used to evaluate the mass loss of the two target materials at different orientation angles. Shape factor for each erodent is determined which show decreasing value for increase in angularity of the particle. It is observed that the wear increases with decrease in the shape factor and increase in the density. The surface morphology shows deep craters and higher value of average surface roughness for angular particles, compared to the blocky shape particles. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:914 / 921
页数:8
相关论文
共 31 条
[1]  
Abbade NP, 2000, TRIBOL INT, V33, P811
[2]   ERODENT PARTICLE CHARACTERIZATION AND THE EFFECT OF PARTICLE-SIZE AND SHAPE ON EROSION [J].
BAHADUR, S ;
BADRUDDIN, R .
WEAR, 1990, 138 (1-2) :189-208
[3]  
Bain A. G., 1970, HYDRAULIC TRANSPORT, V1st, P131
[4]  
Bitter J.G.A., 1962, WEAR, V6, P5
[5]  
Bitter J.G.A., 1963, Wear, V6, P5, DOI [10.1016/0043-1648(63)90073-5, DOI 10.1016/0043-1648(63)90073-5]
[6]   THE INFLUENCE OF THE FLOW FIELD IN SLURRY EROSION [J].
CLARK, HM .
WEAR, 1992, 152 (02) :223-240
[7]   A re-examination of the 'particle size effect' in slurry erosion [J].
Clark, HM ;
Hartwich, RB .
WEAR, 2001, 248 (1-2) :147-161
[8]  
Cox E.P., 1927, J PALEONTOL, V1, P179, DOI DOI 10.2307/1298056
[9]  
DEBREE SEM, 1982, HYDROTRANSPORT, V8
[10]   Improvement in the design of a pot tester to simulate erosion wear due to solid-liquid mixture [J].
Desale, GR ;
Gandhi, BK ;
Jain, SC .
WEAR, 2005, 259 (1-6) :196-202