Study of the seismic performance of hybrid A-frame micropile/MSE (mechanically stabilized earth) wall

被引:8
作者
Chen, Yumin [1 ]
Zhang, Zhichao [1 ,2 ]
Liu, Hanlong [1 ,3 ]
机构
[1] Hohai Univ, Coll Civil & Transportat Engn, Nanjing 210098, Jiangsu, Peoples R China
[2] Minist Land & Resources China, Key Lab Geohazard Prevent Hilly Mt, Fuzhou 350002, Peoples R China
[3] Chongqing Univ, Key Lab New Technol Construct Cities Mt Area, Chongqing 400045, Peoples R China
基金
中国国家自然科学基金;
关键词
MSE wall; steep slope; micropile; reinforcement measure; sliding trend; seismic performance;
D O I
10.1007/s11803-017-0382-0
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The Hybrid A-Frame Micropile/MSE (mechanically stabilized earth) Wall suitable for mountain roadways is put forward in this study: a pair of vertical and inclined micropiles goes through the backfill region of a highway MSE Wall from the road surface and are then anchored into the foundation. The pile cap and grade beam are placed on the pile tops, and then a road barrier is connected to the grade beam by connecting pieces. The MSE wall's global stability, local stability and impact resistance of the road barrier can be enhanced simultaneously by this design. In order to validate the serviceability of the hybrid A-frame micropile/MSE wall and the reliability of the numerical method, scale model tests and a corresponding numerical simulation were conducted. Then, the seismic performance of the MSE walls before and after reinforcement with micropiles was studied comparatively through numerical methods. The results indicate that the hybrid A-frame micropile/MSE wall can effectively control earthquake-induced deformation, differential settlement at the road surface, bearing pressure on the bottom and acceleration by means of a rigid-soft combination of micropiles and MSE. The accumulated displacement under earthquakes with amplitude of 0.1aEuro'0.5 g is reduced by 36.3%aEuro'46.5%, and the acceleration amplification factor on the top of the wall is reduced by 13.4%, 15.7% and 19.3% based on 0.1, 0.3 and 0.5 g input earthquake loading, respectively. In addition, the earthquake-induced failure mode of the MSE wall in steep terrain is the sliding of the MSE region along the backslope, while the micropiles effectively control the sliding trend. The maximum earthquake-induced pile bending moment is in the interface between MSE and slope foundation, so it is necessary to strengthen the reinforcement of the pile body in the interface. Hence, it is proven that the hybrid A-frame micropile/MSE wall system has good seismic performance.
引用
收藏
页码:275 / 295
页数:21
相关论文
共 24 条
[1]   Drucker-Prager Criterion [J].
Alejano, Leandro R. ;
Bobet, Antonio .
ROCK MECHANICS AND ROCK ENGINEERING, 2012, 45 (06) :995-999
[2]  
[Anonymous], 2011, THESIS
[3]  
[Anonymous], 2009, THESIS U MARYLAND
[4]  
Bai G, 2001, J DALIAN I LIGHT IND, V20, P297
[5]  
DiMaggio F.L., 1971, J ENG MECH DIV-ASCE, V97, P935, DOI [10.1061/JMCEA3.0001427, https://doi.org/10.1061/JMCEA3.0001427, DOI 10.1061/JMCEA3.0001427]
[6]  
Hallquist J.O., 2012, Ls-dyna keyword user's manual
[7]  
Jiangbo Xu, 2014, Advances in Soil Dynamics and Foundation Engineering: Selected Papers from the Proceedings of the 2014 Geoshanghai International Congress, P535
[8]   Influence of Soil Reinforcement on Horizontal Displacement of MSE Wall [J].
Kibria, Golam ;
Hossain, Sahadat ;
Khan, Mohammad Sadik .
INTERNATIONAL JOURNAL OF GEOMECHANICS, 2014, 14 (01) :130-141
[9]   Seismic response of reduced-scale modular block and rigid faced reinforced walls through shaking table tests [J].
Latha, G. Madhavi ;
Santhanakumar, P. .
GEOTEXTILES AND GEOMEMBRANES, 2015, 43 (04) :307-316
[10]   Numerical simulation of geosynthetic-reinforced soil walls under seismic shaking [J].
Lee, K. Z. Z. ;
Chang, N. Y. ;
Ko, H. Y. .
GEOTEXTILES AND GEOMEMBRANES, 2010, 28 (04) :317-334