The effects of nodes and resin on the mechanical properties of laminated bamboo timber produced from Gigantochloa scortechinii

被引：24

作者：

Anokye, Rogerson ^{[1
,2
]}

Bakar, Edi Suhaimi ^{[1
,3
]}

Ratnasingam, Jegatheswaran ^{[1
]}

Yong, Adrian Choo Cheng ^{[3
]}

Bakar, Nova Noliza ^{[4
]}

机构：

[1] Univ Putra Malaysia, Fac Forestry, Dept Forest Prod, Serdang 43400, Selangor Darul, Malaysia

[2] Kumasi Polytech, Dept Interior Architecture & Furniture Prod, POB 854, Kumasi, Ghana

[3] Univ Putra Malaysia, Inst Trop Forestry & Forest Prod, Serdang 43400, Selangor Darul, Malaysia

[4] Univ Andalas, Fac Math & Nat Sci, Dept Math, Padang 25163, West Sumatera, Indonesia

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2016年 / 105卷

关键词：

Laminated bamboo timber; Mechanical properties; Nodes; Phenol formaldehyde; Polyvinyl acetate;

D O I：

10.1016/j.conbuildmat.2015.12.083

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The objective of this work was to evaluate the mechanical properties of laminated bamboo timber (LBT) manufactured from bamboo (Gigantochloa scortechinii). Bamboo strips containing nodes were used to produce laminated samples. Each bamboo mat was arranged with 5 cm intervals ranging from 0 cm to 15 cm between the nodes in successive laminae. Phenol formaldehyde (PF) and polyvinyl acetate (PVAc) were used at two spread rates of 200 g/m(2) and 250 g/m(2). The best mechanical properties were found in samples without nodes. Increasing intervals also resulted in increasing strengths. In all the mechanical properties studied, PF had higher strength with 200 g/m(2) spread rate except for shear where PVAc had similar values with PF. It appears that interval levels in the joints influenced the overall mechanical properties of the samples. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：285 / 290

页数：6

共 27 条

[1] Adamopoulos S, 2012, EUR J WOOD WOOD PROD, V70, P897, DOI 10.1007/s00107-012-0620-0
[2] Aicher Simon, 2013, MAT JOINTS TIMBER ST
[3] Fiber texture and mechanical graded structure of bamboo
Amada, S
Ichikawa, Y
Munekata, T
Nagase, Y
Shimizu, H
[J]. COMPOSITES PART B-ENGINEERING, 1997, 28 (1-2) : 13 - 20
[4] American society for test materials (ASTM), D14309 ASTM
[5] Anokye R., 2014, J Environ Sci Comput Sci Eng Technol, V3, P144
[6] Anokye R, 2014, BIORESOURCES, V9, P7484
[7] [Anonymous], D707812 ASTM
[8] [Anonymous], 1991, SPECIFICATION PLYWOO
[9] [Anonymous], ANN BOOK ASTM STAND
[10] [Anonymous], 2005, ANN BOOK ASTM STAND, V04.13

← 1 2 3 →