Energy and exergy analysis of a rotary kiln used for plaster production

被引：40

作者：

Gurturk, Mert ^{[1
]}

Oztop, Hakan F. ^{[2
]}

机构：

[1] Firat Univ, Fac Technol, Dept Energy Syst Engn, TR-23100 Elazig, Turkey

[2] Firat Univ, Fac Technol, Dept Mech Engn, TR-23100 Elazig, Turkey

来源：

APPLIED THERMAL ENGINEERING | 2014年 / 67卷 / 1-2期

关键词：

Exergy; Energy; Rotary kiln; Plaster; Gypsum; EXERGOECONOMIC ANALYSIS; CEMENT; ASSESSMENTS; RECOVERY; SAVINGS;

D O I：

10.1016/j.applthermaleng.2014.03.025

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper presents, the energy and exergy analysis of a rotary kiln used for plaster production was performed. Some parameters, such as losses, irreversibility and design were used for determining the energy and exergy efficiencies. Capacity of the rotary kiln is 22 ton/h and the power of it is 7.8 MW. Based on the calculations from the measured values of the rotary kiln, the energy and exergy efficiencies are calculated as 69% and 16%, respectively. The exergy analysis showed that the exergy destruction rate is determined to be 2969.97 kW which corresponds to 66% of the total exergy input. Also, considering governing parameters, some suggestions and discussions are carried out to get better working conditions and increasing the energy and exergy efficiencies of the rotary kiln. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：554 / 565

页数：12

共 30 条

[1]

[Anonymous], PUBLICATION PLASTER

[2]

[Anonymous], VSRD INT J MECH CIV

[3]

[Anonymous], INT EX EN ENV S 1 4

[4] Exergetic and environmental performance improvement in cement production process by driving force distribution [J].

Ashrafizadeh, Seyed Ali ;

Amidpour, Majid ;

Allahverdi, Ali .

KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2012, 29 (05) :606-613

[5] Thermodynamic and exergoeconomic analysis of a cement plant: Part II - Application [J].

Atmaca, Adem ;

Yumrutas, Recep .

ENERGY CONVERSION AND MANAGEMENT, 2014, 79 :799-808

[6] Thermodynamic and exergoeconomic analysis of a cement plant: Part I - Methodology [J].

Atmaca, Adem ;

Yumrutas, Recep .

ENERGY CONVERSION AND MANAGEMENT, 2014, 79 :790-798

[7]

Bejan A, 1996, THERMAL DESIGN OPTIM

[8]

Boateng AA, 2008, ROTARY KILNS: TRANSPORT PHENOMENA AND TRANSPORT PROCESSES, P1, DOI 10.1016/B978-075067877-3.50003-9

[9] A review on exergy analysis of industrial sector [J].

BoroumandJazi, G. ;

Rismanchi, B. ;

Saidur, R. .

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2013, 27 :198-203

[10] Gypsum hemihydrate-cement blends to improve renderings durability [J].

Camarini, Gladis ;

De Milito, Jose Antonio .

CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (11) :4121-4125

← 1 2 3 →