Hall-Petch relation and boundary strengthening

被引：2671

作者：

Hansen, N ^{[1
]}

机构：

[1] Riso Natl Lab, Dept Mat Res, Ctr Fundamental Res Met Struct Dimens 4, DK-4000 Roskilde, Denmark

来源：

SCRIPTA MATERIALIA | 2004年 / 51卷 / 08期

关键词：

yield stress; flow stress; grain size; dislocation boundaries; nanostructure;

D O I：

10.1016/j.scriptamat.2004.06.002

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The Hall-Petch relation is discussed separately for the yield stress of undeformed polycrystalline metals and for the flow stress of deformed metals. Key structural parameters are the boundary spacing, between grain boundaries in the former case and between dislocation boundaries and high angle boundaries in the latter. An analysis of experimental data supports the Hall-Petch relation for undeformed metals over a grain size range from about 20 nm to hundreds of micrometers. For deformed metals, boundary strengthening is not a constant and the Hall-Petch relation must be modified. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：801 / 806

页数：6

共 50 条

[31] Effect of Grain Boundary Segregation of Phoshorus on the Hall-Petch Coefficient of Ferritic Iron [J].

Fujihara, M. ;

Nakada, N. ;

Tsuchiyama, T. ;

Takaki, S. .

THERMEC 2009, PTS 1-4, 2010, 638-642 :3212-+

[32] A unified mechanistic model for Hall-Petch and inverse Hall-Petch relations of nanocrystalline metals based on intragranular dislocation storage [J].

Han, Quanfeng ;

Yi, Xin .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2021, 154

[33] Hall-Petch Relationship in Electrically Pulsed Al-Zn-Mg Alloys [J].

Zhang, Hexiong ;

Zhang, Xinfang .

ADVANCED ENGINEERING MATERIALS, 2019, 21 (10)

[34] Below the Hall-Petch Limit in Nanocrystalline Ceramics [J].

Ryou, Heonjune ;

Drazin, John W. ;

Wahl, Kathryn J. ;

Qadri, Syed B. ;

Gorzkowski, Edward P. ;

Feigelson, Boris N. ;

Wollmershauser, James A. .

ACS NANO, 2018, 12 (04) :3083-3094

[35] Nanomechanics of Hall-Petch relationship in nanocrystalline materials [J].

Pande, C. S. ;

Cooper, K. P. .

PROGRESS IN MATERIALS SCIENCE, 2009, 54 (06) :689-706

[36] Hall-Petch relationship in Mg alloys: A review [J].

Yu, Huihui ;

Xin, Yunchang ;

Wang, Maoyin ;

Liu, Qing .

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2018, 34 (02) :248-256

[37] Strengthening mechanism in micro-polycrystals with penetrable grain boundaries by discrete dislocation dynamics simulation and Hall-Petch effect [J].

Li, Zhenhuan ;

Hou, Chuantao ;

Huang, Minsheng ;

Ouyang, Chaojun .

COMPUTATIONAL MATERIALS SCIENCE, 2009, 46 (04) :1124-1134

[38] The inverse Hall-Petch effect in nanocrystalline ZrN coatings [J].

Qi, Z. B. ;

Sun, P. ;

Zhu, F. P. ;

Wang, Z. C. ;

Peng, D. L. ;

Wu, C. H. .

SURFACE & COATINGS TECHNOLOGY, 2011, 205 (12) :3692-3697

[39] High-pressure torsion of iron with various purity levels and validation of Hall-Petch strengthening mechanism [J].

Tejedor, Robert ;

Edalati, Kaveh ;

Antonio Benito, Jose ;

Horita, Zenji ;

Maria Cabrera, Jose .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 743 :597-605

[40] The Hall-Petch Relationship for the Sizes of Deformation Jumps in Metals [J].

Shpeizman, V. V. ;

Yakushev, P. N. .

PHYSICS OF THE SOLID STATE, 2019, 61 (07) :1239-1245

← 1 2 3 4 5 →