Mechanical and tribological properties of Al-Ti-N/Al-Cr-B-N multilayer films synthesized by cathodic arc evaporation

被引：21

作者：

Tritremmel, C. ^{[1
]}

Daniel, R. ^{[2
]}

Rudigier, H. ^{[3
]}

Polcik, P. ^{[4
]}

Mitterer, C. ^{[1
,2
]}

机构：

[1] Univ Leoben, Dept Phys Met & Mat Testing, Christian Doppler Lab Adv Hard Coatings, A-8700 Leoben, Austria

[2] Univ Leoben, Dept Phys Met & Mat Testing, A-8700 Leoben, Austria

[3] OC Oerlikon Balzers AG, LI-9496 Balzers, Liechtenstein

[4] PLANSEE Composite Mat GmbH, D-86963 Lechbruck, Germany

来源：

SURFACE & COATINGS TECHNOLOGY | 2014年 / 246卷

关键词：

Al-Cr-N; Multilayer; Mechanical properties; Tribological properties; SUPERHARD COATINGS; PVD COATINGS; HARD; PERFORMANCE; DESIGN;

D O I：

10.1016/j.surfcoat.2014.03.005

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Al-Ti-N/Al-Cr-B-N multilayer films were synthesized by means of cathodic arc evaporation. The influence of the individual layer thicknesses on mechanical and tribological properties was systematically investigated and compared with Al-Cr-B-N single layer films. Al-Cr-B targets with 10 and 20 at.% B, respectively, were used in combination with Al- Ti targets, having an Al/Ti ratio of 1. The multilayer films exhibit enhanced hardness and significantly reduced residual compressive stress together with improved wear resistance compared to Al-Cr-B-N single layer films. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：57 / 63

页数：7

共 30 条

[1] Evaluating the microstructure and performance of nanocomposite PVD TiAlBN coatings [J].

Baker, MA ;

Klose, S ;

Rebholz, C ;

Leyland, A ;

Matthews, A .

SURFACE & COATINGS TECHNOLOGY, 2002, 151 :338-343

[2] Fundamental structure forming phenomena of polycrystalline films and the structure zone models [J].

Barna, PB ;

Adamik, M .

THIN SOLID FILMS, 1998, 317 (1-2) :27-33

[3]

Boxman R.L., 1995, Handbook of Vacuum Arc Science and Technology

[4] The origin of stresses in magnetron-sputtered thin films with zone T structures [J].

Daniel, R. ;

Martinschitz, K. J. ;

Keckes, J. ;

Mitterer, C. .

ACTA MATERIALIA, 2010, 58 (07) :2621-2633

[5]

FRANZ R, 2005, P 16 INT PLANS SEM R, V2, P932

[6]

Holleck H, 1995, SURF COAT TECH, V76, P328, DOI 10.1016/0257-8972(95)02555-3

[7] MULTILAYER COATINGS - INFLUENCE OF FABRICATION PARAMETERS ON CONSTITUTION AND PROPERTIES [J].

HOLLECK, H ;

LAHRES, M ;

WOLL, P .

SURFACE & COATINGS TECHNOLOGY, 1990, 41 (02) :179-190

[8] Mechanical properties and machining performance of Ti1-xAlxN-coated cutting tools [J].

Hörling, A ;

Hultman, L ;

Odén, M ;

Sjölén, J ;

Karlsson, L .

SURFACE & COATINGS TECHNOLOGY, 2005, 191 (2-3) :384-392

[9] Recent progress in large-scale production of nanoscale multilayer/superlattice hard coatings [J].

Hovsepian, PE ;

Münz, WD .

VACUUM, 2002, 69 (1-3) :27-36

[10] Multifunctional multi-component PVD coatings for cutting tools [J].

Kathrein, M ;

Michotte, C ;

Penoy, M ;

Polcik, P ;

Mitterer, C .

SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6) :1867-1871

← 1 2 3 →