Inducing very high cycle fretting-fatigue in the ultrasonic regime

被引：11
|
作者：
Filgueiras, Pedro F. [2 ]
Bathias, Claude [1 ]
Palma, Ernani S. [2 ]
Wang, Chong [1 ]
机构：
[1] Univ Paris Ouest, Lab Energet Mecan Electromagnetisme, F-92410 Yule Davray, France
[2] Univ Fed Minas Gerais, Dept Mech Engn, BR-31270901 Belo Horizonte, MG, Brazil
来源：
TRIBOLOGY INTERNATIONAL | 2014年 / 76卷
关键词：
Fretting; Very high cycle fatigue; Ultrasonic testing; Fatigue damage; STEEL;
D O I：
10.1016/j.triboint.2013.10.023
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Early crack initiation due to fretting may have an important role in fatigue strength of steel components, mainly in the very high-cycle regime, i.e., beyond a million cycles. This work aimed to induce very high-cycle fretting-fatigue on a medium strength steel alloy in the ultrasonic regime. Specimens were subjected to push-pull fatigue and 10 mu m-amplitude fretting with crossed cylinders configuration. The normal load was held constant at 30 N. Results showed a knockdown factor of 1.5 for the fatigue strength in the fretting condition under study. The average diameter of the fretted surfaces was found to linearly increase with decreasing axial bulk stress amplitude. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：57 / 62
页数：6
相关论文
共 50 条
  • [31] Very High Cycle Fatigue of Welds: A Review
    England, Andrew
    Toumpis, Athanasios
    Gorash, Yevgen
    METALS, 2023, 13 (11)
  • [32] Dependence of fatigue strength on inclusion size for high-strength steels in very high cycle fatigue regime
    Liu, Y. B.
    Yang, Z. G.
    Li, Y. D.
    Chen, S. M.
    Li, S. X.
    Hui, W. J.
    Weng, Y. Q.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 517 (1-2): : 180 - 184
  • [33] Very high cycle fatigue of fiber-reinforced polymer composites: Uniaxial ultrasonic fatigue
    Behvar, Alireza
    Sojoodi, Mahyar
    Elahinia, Mohammad
    Niutta, Carlo B.
    Tridello, Andrea
    Paolino, Davide S.
    Haghshenas, Meysam
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2024, 47 (09) : 3083 - 3115
  • [34] Mechanism of fatigue crack initiation and propagation in the very high cycle fatigue regime of high-strength steels
    Grad, P.
    Reuscher, B.
    Brodyanski, A.
    Kopnarski, M.
    Kerscher, E.
    SCRIPTA MATERIALIA, 2012, 67 (10) : 838 - 841
  • [35] Notch Effect on the Fatigue Behavior of a TC21 Titanium Alloy in Very High Cycle Regime
    Nie, Baohua
    Chen, Dongchu
    Zhao, Zihua
    Zhang, Jianglong
    Meng, Yu
    Gao, Guiyan
    APPLIED SCIENCES-BASEL, 2018, 8 (09):
  • [36] Crack path and regularities for ball-bearing fracture in the very-high-cycle fatigue regime
    Shanyavskiy, Andrey A.
    Soldatenkov, Aleksey P.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2022, 45 (11) : 3378 - 3392
  • [37] Crack initiation in the very high cycle fatigue regime of nitrided 42CrMo4 steel
    Weidner, Anja
    Lippmann, Tim
    Biermann, Horst
    JOURNAL OF MATERIALS RESEARCH, 2017, 32 (23) : 4305 - 4316
  • [38] Investigation of crack initiation mechanisms responsible for the fish eye formation in the Very High Cycle Fatigue regime
    Wang, Chong
    Petit, Johann
    Huang, Zhiyong
    Wagner, Daniele
    INTERNATIONAL JOURNAL OF FATIGUE, 2019, 119 (320-329) : 320 - 329
  • [39] Very High Cycle Fatigue Data Acquisition Using High-Accuracy Ultrasonic Fatigue Testing Equipment
    Schoenbauer, Bernd M.
    Fitzka, Michael
    Jaskari, Matias
    Jarvenpaa, Antti
    Mayer, Herwig
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2023, 12 (02) : 172 - 185
  • [40] Factors influencing the GBF size of high strength steels in the very high cycle fatigue regime
    Liu, Y. B.
    Li, S. X.
    Li, Y. D.
    Yang, Z. G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03): : 935 - 942
12345