Inducing very high cycle fretting-fatigue in the ultrasonic regime

被引：11
|
作者：
Filgueiras, Pedro F. [2 ]
Bathias, Claude [1 ]
Palma, Ernani S. [2 ]
Wang, Chong [1 ]
机构：
[1] Univ Paris Ouest, Lab Energet Mecan Electromagnetisme, F-92410 Yule Davray, France
[2] Univ Fed Minas Gerais, Dept Mech Engn, BR-31270901 Belo Horizonte, MG, Brazil
来源：
TRIBOLOGY INTERNATIONAL | 2014年 / 76卷
关键词：
Fretting; Very high cycle fatigue; Ultrasonic testing; Fatigue damage; STEEL;
D O I：
10.1016/j.triboint.2013.10.023
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Early crack initiation due to fretting may have an important role in fatigue strength of steel components, mainly in the very high-cycle regime, i.e., beyond a million cycles. This work aimed to induce very high-cycle fretting-fatigue on a medium strength steel alloy in the ultrasonic regime. Specimens were subjected to push-pull fatigue and 10 mu m-amplitude fretting with crossed cylinders configuration. The normal load was held constant at 30 N. Results showed a knockdown factor of 1.5 for the fatigue strength in the fretting condition under study. The average diameter of the fretted surfaces was found to linearly increase with decreasing axial bulk stress amplitude. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：57 / 62
页数：6
相关论文
共 50 条
  • [1] Fatigue testing of CFRP in the Very High Cycle Fatigue (VHCF) regime at ultrasonic frequencies
    Backe, Daniel
    Balle, Frank
    Eifler, Dietmar
    COMPOSITES SCIENCE AND TECHNOLOGY, 2015, 106 : 93 - 99
  • [2] Common features of fretting-fatigue cracking in steels
    P. C. Chan
    J. C. Thornley
    Practical Failure Analysis, 2002, 2 (6) : 85 - 90
  • [3] Fretting behaviors of a steel up to very high cycle fatigue
    Teng, Zhenjie
    Liu, Hanqing
    Wang, Qingyuan
    Huang, Zhiyong
    Starke, Peter
    WEAR, 2019, 438
  • [4] Very High Cycle Fatigue and Ultrasonic Testing in Multiaxial Loading
    Costa, Pedro R.
    Reis, Luis
    Freitas, Manuel
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2023, 12 (02) : 197 - 213
  • [5] MICROSTRUCTURE AND FATIGUE BEHAVIOUR IN THE VERY HIGH CYCLE FATIGUE REGIME
    Zimmermann, M.
    Stoecker, C.
    Christ, H. -J.
    FATIGUE OF MATERIALS: ADVANCES AND EMERGENCES IN UNDERSTANDING, 2010, : 299 - 315
  • [6] High-frequency, high-temperature fretting-fatigue experiments
    Matlik, J. F.
    Farris, T. N.
    Haake, F. K.
    Swanson, G. R.
    Duke, G. C.
    WEAR, 2006, 261 (11-12) : 1367 - 1382
  • [7] Fatigue behaviour of SiCp-reinforced aluminium composites in the very high cycle regime using ultrasonic fatigue
    Huang, J.
    Spowart, J. E.
    Jones, J. W.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2006, 29 (07) : 507 - 517
  • [8] New specimen and horn design for combined tension and torsion ultrasonic fatigue testing in the very high cycle fatigue regime
    Costa, Pedro
    Vieira, Mario
    Reis, Luis
    Ribeiro, Antonio
    de Freitas, Manuel
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 103 : 248 - 257
  • [9] Ultrasonic fatigue and microstructural characterization of carbon fiber fabric reinforced polyphenylene sulfide in the very high cycle fatigue regime
    Backe, Daniel
    Balle, Frank
    COMPOSITES SCIENCE AND TECHNOLOGY, 2016, 126 : 115 - 121
  • [10] Effect of ultrasonic peening treatment on the fatigue behaviors of a magnesium alloy up to very high cycle regime
    Chen, Yao
    Liu, Fulin
    He, Chao
    Li, Lang
    Wang, Chong
    Liu, Yongjie
    Wang, Qingyuan
    JOURNAL OF MAGNESIUM AND ALLOYS, 2022, 10 (03) : 614 - 626
12345