Optimization design of low-speed surface-mounted PMSM for pumping unit

被引：13

作者：

Cui, Junguo ^{[1
]}

Xiao, Wensheng ^{[1
]}

Wang, Longhua ^{[1
]}

Feng, Hao ^{[1
]}

Zhao, Jianbo ^{[1
]}

Wang, Hongyan ^{[1
]}

机构：

[1] China Univ Petr, Coll Mech & Elect Engn, Qingdao 266580, Shandong, Peoples R China

来源：

INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS | 2014年 / 46卷 / 01期

关键词：

Low-speed surface-mounted PMSM; loss; cogging torque; Taguchi's method; interaction effect; PERMANENT-MAGNET MOTOR; REDUCING COGGING TORQUE; SYNCHRONOUS MOTOR; TAGUCHI METHOD; ROBUST DESIGN; MINIMIZATION; EFFICIENCY; LOSSES; STATOR; ROTOR;

D O I：

10.3233/JAE-141773

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Efficiency and torque ripple are usually especially concerned during the working process of permanent magnet synchronous motor (PMSM). The loss and cogging torque generated during the working process of PMSM are analyzed. A low-speed surface-mounted PMSM used for direct-drive pumping unit is optimized. For increasing efficiency and reducing cogging torque, Taguchi's method is employed and height of stator yoke, width of stator tooth, thickness of permanent magnet, and air-gap length are selected as the variables. The orthogonal experiment is conducted with FEM. The mean of the results and the two-order interaction effects between the selected variables are analyzed, then the best optimization combination is determined by the analysis of variance. The results show that Taguchi's method is an efficient and effective approach, which is finally proved by the prototype test.

引用

页码：217 / 228

页数：12

共 29 条

[1]

[Anonymous], ISEF 2003 11 INT S E

[2] Optimum Design of Tubular Permanent-Magnet Motors for Thrust Characteristics Improvement by Combined Taguchi-Neural Network Approach [J].

Ashabani, Mahdi ;

Mohamed, Yasser Abdel-Rady I. ;

Milimonfared, Jafar .

IEEE TRANSACTIONS ON MAGNETICS, 2010, 46 (12) :4092-4100

[3] Optimization of Permanent Magnet Surface Shapes of Electric Motors for Minimization of Cogging Torque Using FEM [J].

Chen, Ningning ;

Ho, S. L. ;

Fu, W. N. .

IEEE TRANSACTIONS ON MAGNETICS, 2010, 46 (06) :2478-2481

[4]

Chen SX, 1998, IEEE T MAGN, V34, P2135, DOI 10.1109/20.706828

[5]

Gaing ZL, 2011, INT J APPL ELECTROM, V36, P295, DOI [10.3233/JAE-2011-1368, 10.3233/TAD-2011-1368]

[6]

Goga C, 2008, P ICEM, p[1, 6], DOI 10.1109/ICELMACH.2008.4799866

[7]

Guo Hong, 2012, Proceedings of the CSEE, V32, P88

[8]

Huang S., 2011, 3 IEEE INT C POW ENG, P1

[9] Core Loss Modeling for Permanent-Magnet Motor Based on Flux Variation Locus and Finite-Element Method [J].

Huang, Yunkai ;

Dong, Jianning ;

Zhu, Jianguo ;

Guo, Youguang .

IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (02) :1023-1026

[10] Design optimization for cogging torque minimization and efficiency maximization of an SPM motor [J].

Hwang, C. C. ;

Cheng, S. P. ;

Li, P. L. .

IEEE IEMDC 2007: PROCEEDINGS OF THE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE, VOLS 1 AND 2, 2007, :642-+

← 1 2 3 →