Stereology-based fabric analysis of microcracks in damaged granite

Crack-related fabric analyses were carried out in terms of crack tensors using Inada granite deformed inelastically in a triaxial vessel up to post-failure, focusing on the fabric changes during brittle failure. Complementarily, numerical simulation tests were conducted to determine the representative volume element (RVE) required for crack surveying. Numerical simulation tests show that the window size for crack surveying should be at least six times the mean trace length in order to obtain a statistically meaningful crack tensor. A larger window is needed to estimate the distribution of crack radii. In quartz, cracks grow preferentially parallel to the major loading axis. Crack tensors in quartz can provide a measure of damage reflecting inelastic deformation under differential stress in past geological events. During the first stage of inelastic deformation, the number density of cracks decreases with a rather sharp increase in crack diameters. This happens because pre-existing cracks in intact rock join together to make longer cracks. However, the density remains almost constant during the second stage of loading from 90% to 100% of the peak stress. The crack diameter gradually increases due to the stable propagation of cracks. When granite is further deformed beyond the peak stress, the number density decreases again while sharp increases in crack diameters appear as a result of the forking and coalescence of cracks. It is also suggested that load-normal grain boundary cracks are generated as a result of the rolling and sliding of disintegrated blocks in the post-failure stage. (C) 2004 Elsevier B.V. All rights reserved.