Application of dense-medium in an enhanced gravity separator for fine coal cleaning

被引:73
作者
Honaker, RQ [1 ]
Singh, N [1 ]
Govindarajan, B [1 ]
机构
[1] So Illinois Univ, Dept Mining & Mineral Resources Engn, Carbondale, IL 62901 USA
关键词
gravity concentration; dense medium separation; fine particle processing; coal;
D O I
10.1016/S0892-6875(00)00023-6
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Dense-medium separators have proven to be the most efficient processes for removing the undesirable gangue material from run-of-mine coal. The application of high-pressure feed injection into dense-medium cyclones to provide an elevated centrifugal force has recently been found to allow efficient separation performances for the treatment of fine coal (i.e., < 1000 mu m). However, high-pressure injection requires specialized pumps and results in relatively high maintenance requirements. A test program has been conducted to evaluate the potential cleaning of 1000 x 44 mu m fine coal using dense-medium in an enhanced gravity separator (EGS), which mechanically generates an enhanced gravity field. Test results indicate that the use of dense-medium in an EGS resulted in an 8% weight unit increase in mass yield compared to the use of water-only for the treatment of an easy-to-clean Illinois No. 6 fine coal sample. For a difficult-to-clean coal, the mass yield improvement was significantly greater at nearly 20% by weight. From the treatment of four different coal samples, organic efficiency values greater than 90% were obtained over the entire range of product quality values. These findings are reflective of the highly efficiency, low density separations provided by the dense-medium as indicated by probable error values below 0.05. (C) 2000 Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:415 / 427
页数:13
相关论文
共 14 条
[1]  
BAUMGARTNER FE, 1978, MINING C J, P45
[2]  
DEURBROUCK AW, 1974, WASHING FINE COAL DE
[3]  
FOURIE PJF, 1980, J S AFR I MIN METALL, V80, P357
[4]   Application of the falcon concentrator for fine coal cleaning [J].
Honaker, RQ ;
Wang, D ;
Ho, K .
MINERALS ENGINEERING, 1996, 9 (11) :1143-1156
[5]  
Klima MS, 1995, PROCEEDINGS OF THE XIX INTERNATIONAL MINERAL PROCESSING CONGRESS, VOL 2, P139
[6]  
KLIMA MS, 1994, P 11 INT PITTSB COAL, P1267
[7]  
LATHIOOR RA, 1984, P 2 INT C HYDR CRANF
[8]  
Luttrell G.H., 1999, P 16 INT COAL PREP C, P79
[9]  
LUTTRELL GH, 1995, P 12 INT COAL PREP C, P282
[10]  
MENGELERS J, 1982, P 9 INT COAL PREP C