INSTALLATION OF A NEW NEUTRON BEAM FACILITY AT THE U.S. GEOLOGICAL SURVEY TRIGA REACTOR

The fleet of research and training reactors is aging, and no new research reactors are planned in the United States; thus, there is a need to expand the capabilities of existing reactors to meet users' needs. To address these needs, the Colorado School of Mines added a neutron beamline facility to the U.S. Geological Survey TRIGA Reactor (GSTR), a 1-MW(thermal) Mark-I TRIGA reactor located at the Denver Federal Center in Lakewood, Colorado. The original GSTR design did not include any beam ports, and future research efforts will benefit from a neutron beam at the GSTR. Adding new beamline facilities to existing research reactors is both rare and challenging, and this paper describes the design and installation of a new neutron beamline facility at a Mark-I TRIGA reactor with no existing beamline facilities. The design and construction of a radiation beamstop for the new beamline is described in detail. A neutronics model of the neutron beam provides researchers with a useful tool for experiment design. The new neutron beam has a measured length-to-diameter ratio of 200 +/- 10, a neutron flux of 2.2 X 10(6) +/- 6.4 x 10(5) nlcm(2)-s, and an average cadmium ratio of 7.4 using copper, gold, manganese, and indium foils.