Out-of-plane electret-based MEMS energy harvester with the combined nonlinear effect from electrostatic force and a mechanical elastic stopper

This paper presents the fabrication, modeling and characterization of an out-of-plane electret-based vibrational energy harvester (e-VEH) that has both positive and negative charged electret plates integrated into a single seismic mass system. Strong electrostatic spring-softening effect is induced due to the electric field provided by the double-charged electret plates. An elastic stopper is introduced for reliability concern by limiting the motion of seismic mass and meanwhile serves as a functional element to realize spring-hardening effect. The device has an overall volume of about 0.14 cm(3) and is fabricated based on MEMS compatible silicon micromachining technology. When subject to weak excitations, the device exhibits an approximately linear frequency response but changes to a significantly larger broadband when strongly excited due to the combined nonlinear effect from electrostatic force and a mechanical elastic stopper. At a high excitation level of 0.48 g, the experimental results show that the device has 3 dB bandwidths of 3.7 Hz for frequency-up sweep and 2.8 Hz for frequency-down sweep, respectively, which demonstrate a large enhancement compared to the linear response (1.3 Hz). An optimal output power of 0.95 mu W is also achieved with a low resonance of 95 Hz. This corresponds to a normalized power density of 37.4 mu W cm(-3) g(-2).