Oscillations of the fluid flow and the free surface in a cavity with a submerged bifurcated nozzle

被引:22
作者
Kalter, R. [1 ]
Tummers, M. J. [2 ]
Kenjeres, S. [1 ]
Righolt, B. W. [1 ]
Kleijn, C. R. [1 ]
机构
[1] Delft Univ Technol, Dept Chem Engn, NL-2628 BL Delft, Netherlands
[2] Delft Univ Technol, Lab Aero & Hydrodynam, NL-2628 CA Delft, Netherlands
关键词
Self-sustained oscillations; Bifurcated nozzle; Confined jet; Time-resolved PIV; SELF-SUSTAINED OSCILLATIONS; CONTINUOUS-CASTING MOLD; JET FLOW; INSTABILITY; DYNAMICS;
D O I
10.1016/j.ijheatfluidflow.2013.07.007
中图分类号
O414.1 [热力学];
学科分类号
摘要
The free surface dynamics and sub-surface flow behavior in a thin (height and width much larger than thickness), liquid filled, rectangular cavity with a submerged bifurcated nozzle were investigated using free surface visualization and particle image velocimetry (Ply). Three regimes in the free surface behavior were identified, depending on nozzle depth and inlet velocity. For small nozzle depths, an irregular free surface is observed without clear periodicities. For intermediate nozzle depths and sufficiently high inlet velocities, natural mode oscillations consistent with gravity waves are present, while at large nozzle depths long term self-sustained asymmetric oscillations occur. For the latter case, time-resolved PIV measurements of the flow below the free surface indicated a strong oscillation of the direction with which each of the two jets issue from the nozzle. The frequency of the jet oscillation is identical to the free surface oscillation frequency. The two jets oscillate in anti-phase, causing the asymmetric free surface oscillation. The jets interact through a cross-flow in the gaps between the inlet channel and the front and back walls of the cavity. (C) 2013 Elsevier Inc. All rights reserved.
引用
收藏
页码:365 / 374
页数:10
相关论文
共 34 条
[1]   Three-dimensional modeling of the flow and the interface surface in a continuous casting mold model [J].
Anagnostopoulos, J ;
Bergeles, G .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 1999, 30 (06) :1095-1105
[2]   Instability of a confined jet impinging on an water/air free surface [J].
Bouchet, G ;
Climent, E ;
Maurel, A .
EUROPHYSICS LETTERS, 2002, 59 (06) :827-833
[3]  
Chanson H., 1996, Air bubble entrainment in free-surface turbulent shear flows
[4]  
Chaudhary R., 2009, INCLUSIONS CLEAN STE, P1090
[5]  
Dauby P.H., 2011, IRON STEEL TECHNOL, V8, P152
[6]   Descriptive analysis of a mode transition of the flow over an open cavity [J].
Farkas, B. ;
Paal, G. ;
Szabo, K. G. .
PHYSICS OF FLUIDS, 2012, 24 (02)
[7]   Computed oscillations of a confined submerged liquid jet [J].
Gebert, BM ;
Davidson, MR ;
Rudman, MJ .
APPLIED MATHEMATICAL MODELLING, 1998, 22 (11) :843-850
[8]   WATER-MODELING STUDY OF THE SURFACE DISTURBANCES IN CONTINUOUS SLAB CASTER [J].
GUPTA, D ;
LAHIRI, AK .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 1994, 25 (02) :227-233
[9]   Experimental analysis of flashback in lean premixed swirling flames: upstream flame propagation [J].
Heeger, C. ;
Gordon, R. L. ;
Tummers, M. J. ;
Sattelmayer, T. ;
Dreizler, A. .
EXPERIMENTS IN FLUIDS, 2010, 49 (04) :853-863
[10]   FLOW DYNAMICS IN THIN SLAB CASTER MOLDS [J].
HONEYANDS, T ;
HERBERTSON, J .
STEEL RESEARCH, 1995, 66 (07) :287-293