Sepsityper® Kit versus In-House Method in Rapid Identification of Bacteria from Positive Blood Cultures by MALDI-TOF Mass Spectrometry

In order to further accelerate pathogen identification from positive blood cultures (BC), various sample preparation protocols to identify bacteria with MALDI-TOF MS directly from positive BCs have been developed. We evaluated an in-house method in comparison to the Sepsityper (R) Kit (Bruker Daltonics, Bremen, Germany) as well as the benefit of an on-plate formic acid extraction step following positive signal by the BACTECTM FX system. Confirmation of identification was achieved using subcultured growing biomass used for MALDI-TOF MS analysis. A total of 113 monomicrobial positive BCs were analyzed. The rates of Gram-positive bacteria correctly identified to the genus level using in-house method and Sepsityper (R) Kit were 63.3% (38/60) and 81.7% (49/60), respectively (p = 0.025). Identification rates at species level for Gram-positive bacteria with in-house method and Sepsityper (R) kit were 30.0% (18/60) and 66.7% (40/60), respectively (p < 0.001). Identification rates of Gram-negative bacteria were similar with the in-house method and Sepsityper (R) Kit. Additional on-plate formic acid extraction demonstrated significant improvement in the identification rate of Gram-positive bacteria at both genus and species level for both in-house (p = 0.001, p < 0.001) and Sepsityper (R) Kit methods (p = 0.007, p < 0.001). Our in-house method is a candidate for laboratory routines with Sepsityper (R) Kit as a back-up solution when identification of Gram-positive bacteria is unsuccessful.