Forming force in Single Point Incremental Forming under different bending conditions

被引：38

作者：

Bagudanch, I. ^{[1
]}

Centeno, G. ^{[2
]}

Vallellano, C. ^{[2
]}

Garcia-Romeu, M. L. ^{[1
]}

机构：

[1] Univ Girona, Dept Mech Engn & Ind Construct, Campus Montilivi, Girona 17071, Spain

[2] Univ Seville, Sch Engn, Dept Mech & Mat Engn, Seville 41092, Spain

来源：

MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013) | 2013年 / 63卷

关键词：

Single Point Incremental Forming; forming force;

D O I：

10.1016/j.proeng.2013.08.207

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Estimation of incremental sheet forming force is required in order to design dedicated equipment, utilize adapted machinery or develop online process control strategies. In the present work, forces on Single Point Incremental Forming (SPIF) of variable wall angle geometry were studied under different bending conditions. The effect of several process parameters was analyzed. The results demonstrated that the maximum forming force increases with the tool diameter and the step down while for higher spindle speeds the forming force decreases. The last effect is due to the higher friction between the tool and the blank when using a fixed spindle speed, which causes an increase of the forming temperature. The forming force evolution, which varies with the bending conditions, could be used as an indicator to prevent the sheet failure. (C) 2013 The Authors. Published by Elsevier Ltd.

引用

页码：354 / 360

页数：7

共 11 条

[1] Force prediction for single point incremental forming deduced from experimental and FEM observations [J].

Aerens, R. ;

Eyckens, P. ;

Van Bael, A. ;

Duflou, J. R. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 46 (9-12) :969-982

[2]

[Anonymous], 2005, CIRP ANN-MANUF TECHN, DOI DOI 10.1016/S0007-8506(07)60021-3

[3]

Bagudanch I., 2011, P INT C TECHN PLAST, P541

[4]

Centeno G., 2012, 14 MET FORM INT C, P447

[5] Experimental study on force measurements for single point incremental forming [J].

Duflou, Joost ;

Tunckol, Yasemin ;

Szekeres, Alex ;

Vanherck, Paul .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 189 (1-3) :65-72

[6] The influence of tool rotation on an incremental forming process [J].

Durante, M. ;

Formisano, A. ;

Langella, A. ;

Minutolo, F. Memola Capece .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (09) :4621-4626

[7] On-line control of single point incremental forming operations through punch force monitoring [J].

Filice, L. ;

Ambrogio, G. ;

Micari, F. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) :245-248

[8] Force Modeling in Single Point Incremental Forming of Variable Wall Angle Components [J].

Perez-Santiago, Rogelio ;

Bagudanch Frigole, Isabel ;

Luisa Garcia-Romeu de Luna, Maria .

SHEET METAL 2011, 2011, 473 :833-+

[9] Failure mechanisms in single-point incremental forming of metals [J].

Silva, Maria B. ;

Nielsen, Peter S. ;

Bay, Niels ;

Martins, P. A. F. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2011, 56 (9-12) :893-903

[10] A new approach for failure criterion for sheet metals [J].

Stoughton, Thomas B. ;

Yoon, Jeong Whan .

INTERNATIONAL JOURNAL OF PLASTICITY, 2011, 27 (03) :440-459

← 1 2 →