Electroless NiP micro- and nano-composite coatings

被引:106
作者
Sarret, M. [1 ]
Muller, C. [1 ]
Amell, A. [1 ]
机构
[1] Univ Barcelona, Dept Quim Fis, ELECTRODEP, E-08028 Barcelona, Spain
关键词
electroless nickel-phosphorous; micro-composite; nano-composite;
D O I
10.1016/j.surfcoat.2005.11.127
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Electroless NiP composite coatings were obtained by incorporating two kinds of particles, SiC and Si3N4, to analyze the influence of the type of particle both on the codeposition process and on the coating properties. Particles with sizes ranging from 30 nm to 2 Pm were selected to study the influence of this parameter on the amount of embedded particles. All composite coatings were characterized by composition, morphology, structure, roughness and some tribological properties. Results indicated that, while there was almost no difference between carbide and nitride incorporation for micron-sized particles, this variable was very important with the nano-sized ones. Moreover, it was observed that the growth mechanism of the metallic matrix was much more modified by the nano-particles than by the micron-sized ones. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:389 / 395
页数:7
相关论文
共 22 条
  • [1] The effect of heat treatment on the structure and abrasive wear resistance of autocatalytic NiP and NiP-SiC coatings
    Apachitei, I
    Tichelaar, FD
    Duszczyk, J
    Katgerman, L
    [J]. SURFACE & COATINGS TECHNOLOGY, 2002, 149 (2-3) : 263 - 278
  • [2] Solid-state reactions in low-phosphorus autocatalytic NiP-SiC coatings
    Apachitei, I
    Tichelaar, FD
    Duszczyk, J
    Katgerman, L
    [J]. SURFACE & COATINGS TECHNOLOGY, 2001, 148 (2-3) : 284 - 295
  • [3] Electroless Ni-P composite coatings
    Balaraju, JN
    Narayanan, TSNS
    Seshadri, SK
    [J]. JOURNAL OF APPLIED ELECTROCHEMISTRY, 2003, 33 (09) : 807 - 816
  • [4] BALARAJU JN, 2000, THESIS I I T MADRAS
  • [5] INTERFACIAL CHARACTERIZATION OF SILICON-NITRIDE POWDERS
    BERGSTROM, L
    PUGH, RJ
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1989, 72 (01) : 103 - 109
  • [6] XPS CHARACTERIZATION OF ULTRAFINE SI3N4 POWDERS
    BERTOTI, I
    VARSANYI, G
    MINK, G
    SZEKELY, T
    VAIVADS, J
    MILLERS, T
    GRABIS, J
    [J]. SURFACE AND INTERFACE ANALYSIS, 1988, 12 (1-12) : 527 - 530
  • [7] The role of Si-O species in the colloidal stability of silicon-containing ceramic powders
    Fukada, Y
    Nicholson, PS
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (01) : 17 - 23
  • [8] Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles
    Garcia, I
    Fransaer, J
    Celis, JP
    [J]. SURFACE & COATINGS TECHNOLOGY, 2001, 148 (2-3) : 171 - 178
  • [9] Hardness, friction and wear characteristics of nickel-SiC electroless composite deposits
    Grosjean, A
    Rezrazi, M
    Takadoum, J
    Berçot, P
    [J]. SURFACE & COATINGS TECHNOLOGY, 2001, 137 (01) : 92 - 96
  • [10] Some morphological characteristics of the incorporation of silicon carbide (SiC) particles into electroless nickel deposits
    Grosjean, A
    Rezrazi, M
    Berçot, P
    [J]. SURFACE & COATINGS TECHNOLOGY, 2000, 130 (2-3) : 252 - 256