Battery Management System-Balancing Modularization Based on a Single Switched Capacitor and Bi-Directional DC/DC Converter with the Auxiliary Battery

被引:47
作者
Daowd, Mohamed [1 ]
Antoine, Mailier [1 ]
Omar, Noshin [1 ]
Lataire, Philippe [1 ]
Van den Bossche, Peter [1 ]
Van Mierlo, Joeri [1 ]
机构
[1] Vrije Univ Brussel, Dept Elect Engn & Energy Technol, B-1050 Brussels, Belgium
关键词
battery management system (BMS); single switched capacitor (SSC); isolated bidirectional DC/DC converter (IBC); cell equalization; battery balancing; MATLAB/Simulink; LITHIUM-ION BATTERY; CHARGE EQUALIZATION; ENERGY-STORAGE; STATE; LIFE;
D O I
10.3390/en7052897
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Lithium-based batteries are considered as the most advanced batteries technology, which can be designed for high energy or high power storage systems. However, the battery cells are never fully identical due to the fabrication process, surrounding environment factors and differences between the cells tend to grow if no measures are taken. In order to have a high performance battery system, the battery cells should be continuously balanced for maintain the variation between the cells as small as possible. Without an appropriate balancing system, the individual cell voltages will differ over time and battery system capacity will decrease quickly. These issues will limit the electric range of the electric vehicle (EV) and some cells will undergo higher stress, whereby the cycle life of these cells will be shorter. Quite a lot of cell balancing/equalization topologies have been previously proposed. These balancing topologies can be categorized into passive and active balancing. Active topologies are categorized according to the active element used for storing the energy such as capacitor and/or inductive component as well as controlling switches or converters. This paper proposes an intelligent battery management system (BMS) including a battery pack charging and discharging control with a battery pack thermal management system. The BMS user input/output interfacing. The battery balancing system is based on battery pack modularization architecture. The proposed modularized balancing system has different equalization systems that operate inside and outside the modules. Innovative single switched capacitor (SSC) control strategy is proposed to balance between the battery cells in the module (inside module balancing, IMB). Novel utilization of isolated bidirectional DC/DC converter (IBC) is proposed to balance between the modules with the aid of the EV auxiliary battery (AB). Finally an experimental step-up has been implemented for the validation of the proposed balancing system.
引用
收藏
页码:2897 / 2937
页数:41
相关论文
共 58 条
[1]  
[Anonymous], THESIS VRIJE U BRUSS
[2]  
[Anonymous], 2011, J. Converg. Inf. Technol.
[3]  
[Anonymous], 2010, Vehicle Power and Propulsion Conference (VPPC), 2010 IEEE
[4]  
[Anonymous], 2010, IEEE 72 VTC
[5]  
[Anonymous], 2005, IEEE VEH POW PROP C
[6]   Double-tiered switched-capacitor battery charge equalization technique [J].
Baughman, Andrew C. ;
Ferdowsi, Mehdi .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2008, 55 (06) :2277-2285
[7]   Cell balancing considerations for lithium-ion battery systems [J].
Bentley, WF .
TWELFTH ANNUAL BATTERY CONFERENCE ON APPLICATIONS AND ADVANCES, 1997, :223-226
[8]  
Cadar Dorin V., 2010, 2010 33rd International Spring Seminar on Electronics Technology (ISSE 2010), P290, DOI 10.1109/ISSE.2010.5547305
[9]  
Cao J, 2008, P IEEE VEH POW PROP, P1
[10]  
Chakraborty S., 2004, INTELEC 26th Annual International Telecommunications Energy Conference (IEEE Cat. No.04CH37562), P248